FC 3208 Fan Bracket Plate

[dthollis1961]

Thanks. Got them made and put on. Not sure if I got the wrong
Horton fan or if they are made in "one size fits all." The slots
where you bolt the fan to the front of the engine are about 1/2"
wide but the bolts are 3/8". I made some bushings.

David Hollis 84 FC35 Springfield,IL


--- In WanderlodgeForum@yahoogroups.com, putneyflash@... wrote:
>
> They carry a cat part number, but like emike says they are just
flat stock
>
> re brake 1983 fc-35 sb " sagecoach"
> -------------- Original message from "Mike Hohnstein"
<MHOHNSTEIN@...>: --------------
>
>
> 3/16" flat stock will work well.
> MH
> ----- Original Message -----
> From: dthollis1961
> To: WanderlodgeForum@yahoogroups.com
> Sent: Thursday, June 22, 2006 8:46 AM
> Subject: [WanderlodgeForum] FC 3208 Fan Bracket Plate
>
> My recently acquired 84 FC35 has had 2 Horton Air Fans and 2
radiators
> in as many years (not on my dime). There are no plates (spacers)
> between the bolt heads and the fan bracket where the fan bolts to
the
> front of the engine and I would like to get some of these plates
and
> install them. Can anyone recall if these plates are simply flat
stock
> with 2 holes in them or is there more to them?
>
> Thanks
>
> David Hollis 84 FC35 Springfield,IL
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>