Xantrex inverter installation

[Henry Jay Hannigan]

---I have a question......I have the two old bricks battery chargers
and wonder if I can connect my xantrex 2500 Plus and minus lead to
the existing battery wires without any problem???
seems OK as I would just be disconnection two battery chargers and
replacing them in same circuit.

Hope someone out there has the answer. hooking up the AC out is for
another day!
Regards,
Hank Hannigan
80FC31








In WanderlodgeForum@yahoogroups.com, "birdshill123"
wrote:
>
> One of my upcoming projects on out 1988 FC will be to replace the
> existing inverter and "dumb" battery charger with the 458, 2000
Xantrex
> inverter charger. I do not plan on running the A/C with the
inverter.
> But I thought it would be nice to operate the Micro and once in a
while
> the TV's. In my unit the existing charger and inverter are in
adjacent
> comaprtments, streetside. The inverter is in the large
compartrment
> just forward of the dinette and the charger is in the one right
under
> the dinette. The charger also has a big fan in the compartment for
> cooling. I have not yet determined which circuits are powered by
the
> inverter but I only see one 110volt romex coming out of the
inverter. I
> have the basic remote for the Xantrex and will probably be able
to
> utilize the existing wiring for the remote. I do not have a
complete
> wiring diagram and would appreciate any tips on this install. If I
just
> connect the existing wiring to the inverter/charger what will be
the
> results? Any suggestions appreciated. As always this forum is a
wealth
> of knowledge.
>
> Bruce
>