Threaded Mode | Linear Mode

06-10-2006, 23:08

The inverter circuit powers:
The ice maker( duplex behind cabinet), the oulet on the sink counter
near the Nu-Tone.
The electric drapes (if this option exists).
Front and rear TV's are plugged into duplex outlets, The other half
we sometimes use for battery chargers, (phones, computer, GPS, etc.)
If you have sufficient inverter power, wiring can be changed at the
circuit breakers in the AC load center panel.
The Pac 1500 is probably dead.

Bill 88 FC

--- In WanderlodgeForum@yahoogroups.com, "birdshill123"
wrote:
>
> One of my upcoming projects on out 1988 FC will be to replace the
> existing inverter and "dumb" battery charger with the 458, 2000
Xantrex
> inverter charger. I do not plan on running the A/C with the
inverter.
> But I thought it would be nice to operate the Micro and once in a
while
> the TV's. In my unit the existing charger and inverter are in
adjacent
> comaprtments, streetside. The inverter is in the large
compartrment
> just forward of the dinette and the charger is in the one right
under
> the dinette. The charger also has a big fan in the compartment for
> cooling. I have not yet determined which circuits are powered by
the
> inverter but I only see one 110volt romex coming out of the
inverter. I
> have the basic remote for the Xantrex and will probably be able
to
> utilize the existing wiring for the remote. I do not have a
complete
> wiring diagram and would appreciate any tips on this install. If I
just
> connect the existing wiring to the inverter/charger what will be
the
> results? Any suggestions appreciated. As always this forum is a
wealth
> of knowledge.
>
> Bruce
>