8V92 Owners

[jqrjr]

Hi,

Has anybody replaced the oil temp sending unit in the 8V92, I am trying
to find the location of the Oil Temp. sender, not the pressure sender.

Thanks

Jim RIordan
88 WBWL XXVB
Stuart, Fl.

[Leroy Eckert]

Sorry I sent you to the oil pressure sender. I'll try again.
I have not changed my oil temperature sender or verified that the sender
located on top of the spin on oil filter adapter bolted to the left side of the
engine operates the oil temp gauge. I have always assumed it does. To verify
disconnect the wire(mine is green) turn on the key then ground the wire and the
gauge should move to the right.
Hope that is better advise and more specific. The sender is not easy to see or
reach.

Leroy Eckert
1990 WB-40"Smoke N Mirrors"
Niceville, FL



----- Original Message -----
From: jqrjr
To: WanderlodgeForum@yahoogroups.com
Sent: Wednesday, May 02, 2007 8:58 AM
Subject: [WanderlodgeForum] 8V92 Owners


Hi,

Has anybody replaced the oil temp sending unit in the 8V92, I am trying
to find the location of the Oil Temp. sender, not the pressure sender.

Thanks

Jim RIordan
88 WBWL XXVB
Stuart, Fl.





[Non-text portions of this message have been removed]