Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Air Bag Height
04-20-2007, 07:31
Post: #1
Air Bag Height
Anyone know what height the air bags should be set on a 1992 WB40?

I have a feeling mine are not correct. I am nose high, and leaning to
the drivers side as well. So I am betting the front is too high, as
well as the right rear corner. But before I start messing with it, I
would like to know what height the bags on the front, drive, and tag
axle should be so I can get them set properly.

Michael Brundridge
1992 WB40 - currently un-named
Georgetown, TX
Quote this message in a reply
04-20-2007, 22:28
Post: #2
Air Bag Height
Mike

The Ridewell information that I have in my BLUE BOX for a 1993 is

For a RAS-227 steer 6.75"
For a RAD-227 Drive with Rockwell Axle 8.31"
For a RAD-227 Drive with Eaton Axle 8.06"

Let me know how the adjustment goes, the front on mine is about one
inch too low right now.

Steve Quandt
Iron Mountain, MI
1993 PT-40

--- In WanderlodgeForum@yahoogroups.com, "mbrund" <mbrund@...> wrote:
>
> Anyone know what height the air bags should be set on a 1992 WB40?
>
> I have a feeling mine are not correct. I am nose high, and leaning
to
> the drivers side as well. So I am betting the front is too high, as
> well as the right rear corner. But before I start messing with it, I
> would like to know what height the bags on the front, drive, and tag
> axle should be so I can get them set properly.
>
> Michael Brundridge
> 1992 WB40 - currently un-named
> Georgetown, TX
>
Quote this message in a reply
04-21-2007, 15:16
Post: #3
Air Bag Height
Steve,

Thanks for that info, and reminding me that I should have looked in
my blue box first Smile as right after reading your response I looked
and found my copy of the Ridewell book and it states the same info
and how to adjust it.

Michael Brundridge
1992 WB40
Georgetown, TX

--- In WanderlodgeForum@yahoogroups.com, "smquandt"
wrote:
>
> Mike
>
> The Ridewell information that I have in my BLUE BOX for a 1993 is
>
> For a RAS-227 steer 6.75"
> For a RAD-227 Drive with Rockwell Axle 8.31"
> For a RAD-227 Drive with Eaton Axle 8.06"
>
> Let me know how the adjustment goes, the front on mine is about
one
> inch too low right now.
>
> Steve Quandt
> Iron Mountain, MI
> 1993 PT-40
>
> --- In WanderlodgeForum@yahoogroups.com, "mbrund" <mbrund@> wrote:
> >
> > Anyone know what height the air bags should be set on a 1992
WB40?
> >
> > I have a feeling mine are not correct. I am nose high, and
leaning
> to
> > the drivers side as well. So I am betting the front is too
high, as
> > well as the right rear corner. But before I start messing with
it, I
> > would like to know what height the bags on the front, drive, and
tag
> > axle should be so I can get them set properly.
> >
> > Michael Brundridge
> > 1992 WB40 - currently un-named
> > Georgetown, TX
> >
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)