Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Full Version: oil type
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

birdboat45

What oil to use in 8v92 Delo 40 weight 400 or what. Thanks
Jack Jones
87 pt 40

Don Bradner

Straight 40. I'm not overly brand-conscious, but it happens that I'm sitting in
the waiting room (the wonders of air cards!) of a DD service operation getting
an oil change as I type this, and they are using Delo 100.

As an aside, CCW tried to change my oil in January but couldn't get the plug
out. It has/had a male square 5/8-inch plug. The guys here were only able to
round it off some more, so they welded a large nut to it, and that allowed them
to get enough torque to do the job. It was cross-threaded, with most of the
damage done to the plug and not the pan. They think that cleaning the threads
with a tap will allow a new plug to work OK.

Don Bradner
90 PT40 "Blue Thunder"
Eureka, CA

On 3/28/2008 at 5:07 PM birdboat45 wrote:

>What oil to use in 8v92 Delo 40 weight 400 or what. Thanks
>Jack Jones
>87 pt 40

Howard O. Truitt


Jack,
There is many varied opinions about oil.
I use only Shell Rotella 40 weight in my 8V92. I buy it from the local distributor.
Howard Truitt
Camilla, Ga.
86 8V92 PT40
----- Original Message -----
From: "birdboat45@yahoo.com"
To: "WanderlodgeForum@yahoogroups.com"
Sent: Friday, March 28, 2008 1:07 PM
Subject: [WanderlodgeForum] oil type


What oil to use in 8v92 Delo 40 weight 400 or what. Thanks
Jack Jones
87 pt 40







No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.22.1/1345 - Release Date: 3/26/2008 6:50 PM
Reference URL's