Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Gas springs for compartment doors
11-30-2009, 17:02
Post: #1
Gas springs for compartment doors
I'm having some issues trying to find the correct replacements for the cargo bay
and interior gas springs.

I have the numbers FMR115 and FBN12C off the existing ones, but they don't cross
reference anywhere

I know that the H9412 is a replacement for the interior ... but what about the
exterior one ? What kind of thrust lbs should I use ?

It's an '86 PT40 ...

THANKS !!
Quote this message in a reply
11-30-2009, 23:27
Post: #2
Gas springs for compartment doors
Orr and Orr is the place to got for these...

http://www.orrorr.com/

Give them a call.  I replaced pretty much all of them on my '87 PT40 with springs from them.


HTH, Joe


On Mon, Nov 30, 2009 at 9:02 PM, zboy59 <"martys@title-check.com"> wrote:
 


I'm having some issues trying to find the correct replacements for the cargo bay and interior gas springs.



I have the numbers FMR115 and FBN12C off the existing ones, but they don't cross reference anywhere



I know that the H9412 is a replacement for the interior ... but what about the exterior one ? What kind of thrust lbs should I use ?



It's an '86 PT40 ...



THANKS !!



Yahoo! Groups
Switch to: "WanderlodgeForum-traditional@yahoogroups.com?subject=Change+Delivery+Format:+Traditional", "WanderlodgeForum-digest@yahoogroups.com?subject=Email+Delivery:+Digest" • "WanderlodgeForum-unsubscribe@yahoogroups.com?subject=Unsubscribe" • Terms of Use
.


Quote this message in a reply
12-01-2009, 01:54
Post: #3
Gas springs for compartment doors
Greetings:

Look for the force numbers on yours in the middle of the sequence of digits near
the "F" number: on my exterior Stabilus units a typical example is "1657EE 0500N
307/09 A 5" which is a 500 Newton (metric unit of force) or about 110 lbs unit.

The interior springs on my '87 were replaced by a previous owner with Supra 9"
35lb units. I recently replaced the exterior springs with FBN12K 500 Newton
(~110 lb) Stabilus units from Orr and Orr.

M.R.Kane
1987 PT40
currently Terrell, TX

--- In WanderlodgeForum@yahoogroups.com, "zboy59" wrote:
>
> I'm having some issues trying to find the correct replacements for the cargo
bay and interior gas springs.
>
> I have the numbers FMR115 and FBN12C off the existing ones, but they don't
cross reference anywhere
>
> I know that the H9412 is a replacement for the interior ... but what about the
exterior one ? What kind of thrust lbs should I use ?
>
> It's an '86 PT40 ...
>
> THANKS !!
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)