Member Funded
Link Directory
Wanderlodge Trader
Document Library
User Locations
Gallery
Calendar
Wanderlodge Gurus - The Member Funded Wanderlodge Forum
/
Literature
/
Documentation, Articles, and How To's 
/
S50 and 60 DDEC III & IV ECM pinout connectors and Senor locations
/
S50 and 60 DDEC III & IV ECM pinout connectors and Senor locations
|
S50 and 60 DDEC III & IV ECM pinout connectors and Senor locations
|
|
03-06-2013, 13:30
Post: #1
|
|||
|
|||
|
S50 and 60 DDEC III & IV ECM pinout connectors and Senor locations
In my never ending quest to continue to blow out Davids online storage budget, please see the attached DD guide. I told David to feel free to "throttle me" if I am posting too much documentation or items not of value to the general population.
   OK, So you've gotten a dreaded error code screaming at you from the Allison tranny pad or one of the various online monitoring systems. You've decoded it and found out which sensor it is. With the aging of our various buses, sometimes it's as simple of a fix as a dirty connection to a sensor or a bad sensor, loose wire, hose, etc...... So, where is it located on the engine so you can begin to troubleshoot???????? Rather than spending hours looking for it, check the document below.......it may save you some time for other more fun endeavors!
Pete and Donna Chin 95 42' WLWB On The Road Always! :-) " We'll raise up our glasses against evil forces singing, Whiskey for my men, and beer for my horses!"-Toby Keith & Willie Nelson - The bridge from Toby Keith's title album track "beer for my horses" |
|||
|
![[+]](http://www.wanderlodgegurus.com/images/collapse_collapsed.gif)
|
03-06-2013, 15:59
Post: #2
|
|||
|
|||
|
RE: S50 and 60 DDEC III & IV ECM pinout connectors and Senor locations
What's an "ecm señor"? Is that the little guy who sits in the box and runs stuff??!!
John Mace 06 450LXi bigger bird living in the wild hinterlands of the north free to roam without the man getting me down |
|||
|
|
|
03-06-2013, 16:14
Post: #3
|
|||
|
|||
RE: S50 and 60 DDEC III & IV ECM pinout connectors and Senor locations
(03-06-2013 15:59)Arcticdude Wrote: What's an "ecm señor"? Is that the little guy who sits in the box and runs stuff??!! See,See!!!!!  Believe it or not, that's EXACTLY how it's spelled on the DD site when it was open to us mere mortals! I NEVER caught that after all these years, thanks!
Pete and Donna Chin 95 42' WLWB On The Road Always! :-) " We'll raise up our glasses against evil forces singing, Whiskey for my men, and beer for my horses!"-Toby Keith & Willie Nelson - The bridge from Toby Keith's title album track "beer for my horses" |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)