Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fiberglass, Metal, Plastic Bonding Adhesive
11-25-2013, 20:51 (This post was last modified: 11-25-2013 20:54 by davidbrady.)
Post: #1
Fiberglass, Metal, Plastic Bonding Adhesive
While messing around with my radiator lower plates I managed to break a pair of mounting studs away from their fiberglass backing. (See pics). I stopped by my local auto body paint supplier and they recommended Lord Fusor Adhesive to rebond the fasteners, specifically Fusor 127EZ Plastic Bonding Adhesive. It worked very well. Lord Fusor is a set of two part urethane epoxies and a very handy dual cartridge mixing gun. Highly recommended for your metal, fiberglass, and plastic bonding needs.





Attached File(s) Thumbnail(s)
İmage İmage İmage İmage

david brady,
'02 Wanderlodge LXi 'Smokey' (Sold),
'04 Prevost H3 Vantare 'SpongeBob'

"I don't like being wrong, but I really hate being right"
Find all posts by this user
Like Post Quote this message in a reply
11-25-2013, 22:11
Post: #2
RE: Fiberglass, Metal, Plastic Bonding Adhesive
You are going to smooth and polish that urethane, aren't you??!!! Big Grin

John Mace
06 450LXi bigger bird
living in the wild hinterlands of the north
free to roam without the man getting me down
Find all posts by this user
Like Post Quote this message in a reply
[+] 1 user Likes Arcticdude's post
11-25-2013, 22:18
Post: #3
RE: Fiberglass, Metal, Plastic Bonding Adhesive
Yup, just as soon as I finish up with my slack adjusters! Damn that photo zoom feature! LOL Smile Foiled every time!

david brady,
'02 Wanderlodge LXi 'Smokey' (Sold),
'04 Prevost H3 Vantare 'SpongeBob'

"I don't like being wrong, but I really hate being right"
Find all posts by this user
Like Post Quote this message in a reply
11-25-2013, 22:23
Post: #4
RE: Fiberglass, Metal, Plastic Bonding Adhesive
I'm still waiting to see the polished muffler bearings! Lol!

John Mace
06 450LXi bigger bird
living in the wild hinterlands of the north
free to roam without the man getting me down
Find all posts by this user
Like Post Quote this message in a reply
[+] 1 user Likes Arcticdude's post
11-25-2013, 22:34
Post: #5
RE: Fiberglass, Metal, Plastic Bonding Adhesive
John,

Now you've gone and disrupted my entire workflow process - the slack adjusters, the muffler bearings, and etching "Arcticdude" into my fresh urethane adhesive will have to wait till I disable that annoying zoom feature! Big GrinBig GrinBig Grin

david brady,
'02 Wanderlodge LXi 'Smokey' (Sold),
'04 Prevost H3 Vantare 'SpongeBob'

"I don't like being wrong, but I really hate being right"
Find all posts by this user
Like Post Quote this message in a reply
11-26-2013, 00:06
Post: #6
RE: Fiberglass, Metal, Plastic Bonding Adhesive
No rest for the weary!!

John Mace
06 450LXi bigger bird
living in the wild hinterlands of the north
free to roam without the man getting me down
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)