+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: holding tank repair (/showthread.php?tid=907)
holding tank repair - iwhotoo - 06-22-2005 14:35
Yes, I know that I forgot to sign my last post-I'll try to remember...
The previous owner did a horrible job fabricating a sewer hookup and
when it fell apart this week, I was left with a giant hole in my
black water tank. It looks like a bit of work to drop the tanks (I
don't have a stock setup) I was going to try to glue/repair it
myself. Luckily, I had driven past a local outfit that makes tanks.
Anyway, I stopped by there and am sooo glad that I did. They will
make the repair for me (luckily, the damage is quite accessible).
Including a new 3inch fitting, they estimate the cost at between 20
and 40 bucks!
They are very nice there and if you need a tank or a repair in
Southern California, that's where you should go....
RONCO Plastics 15022 parkway Loop. Tustin, CALIF 92780 (714) 259-1385
Mario Barrios
1979 FC35 (still no name)
holding tank repair - randydupree - 06-22-2005 22:59
what did you do to the steering? woody is looking for help on that
issue.randydupree93wb
----- Original Message -----
From: iwhotoo
To: WanderlodgeForum@yahoogroups.com
Sent: Wednesday, June 22, 2005 10:35 PM
Subject: [WanderlodgeForum] holding tank repair
Yes, I know that I forgot to sign my last post-I'll try to remember...
The previous owner did a horrible job fabricating a sewer hookup and
when it fell apart this week, I was left with a giant hole in my
black water tank. It looks like a bit of work to drop the tanks (I
don't have a stock setup) I was going to try to glue/repair it
myself. Luckily, I had driven past a local outfit that makes tanks.
Anyway, I stopped by there and am sooo glad that I did. They will
make the repair for me (luckily, the damage is quite accessible).
Including a new 3inch fitting, they estimate the cost at between 20
and 40 bucks!
They are very nice there and if you need a tank or a repair in
Southern California, that's where you should go....
RONCO Plastics 15022 parkway Loop. Tustin, CALIF 92780 (714) 259-1385
Mario Barrios
1979 FC35 (still no name)
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/
b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
holding tank repair - Curt Sprenger - 06-23-2005 02:34
Mario,
I enjoyed talking with you last week. Contact me and stop by with your
coach. Other than one day in SanDiego I plan to be home for the next two
weeks.
For many years now I have used RONCO Plastics for all my tank needs.
They build the the best tanks, and the cost is half or less than
anywhere else. You did good finding them. A few months ago I had them
build me a custom oil change holding tank.
Curt Sprenger â87PT38, Anaheim, Calif.
iwhotoo wrote:
>
> Yes, I know that I forgot to sign my last post-I'll try to remember...
>
> The previous owner did a horrible job fabricating a sewer hookup and
> when it fell apart this week, I was left with a giant hole in my
> black water tank. It looks like a bit of work to drop the tanks (I
> don't have a stock setup) I was going to try to glue/repair it
> myself. Luckily, I had driven past a local outfit that makes tanks.
>
> Anyway, I stopped by there and am sooo glad that I did. They will
> make the repair for me (luckily, the damage is quite accessible).
> Including a new 3inch fitting, they estimate the cost at between 20
> and 40 bucks!
>
> They are very nice there and if you need a tank or a repair in
> Southern California, that's where you should go....
>
> RONCO Plastics 15022 parkway Loop. Tustin, CALIF 92780 (714) 259-1385
>
> Mario Barrios
> 1979 FC35 (still no name)
>
holding tank repair - waynekotila - 12-01-2009 03:36
Kerry is correct, I tore the outlet pipe out of the holding tank on a 1982 FC35
years ago and after trying many methods of repair the one that worked was
fiberglass cloth and epoxy. The epoxy/fiberglass fixed worked great and was
still holding fine when I sold the coach a few years latter.
Wayne
96WB42