+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Organized Utensil Drawer (/showthread.php?tid=7685)
Organized Utensil Drawer - Curt Sprenger - 02-16-2009 05:09
The Utensil Drawer in our coach was pretty much always a mess. Using those low profile plastic organizers helped some but still a mess. It was time to organize the drawer my way. First I used vertical slotted boards at the forward and rear of the drawer. Next I used 1/4" thick boards that fit into those slots. Now the drawer is organized, and there is room for more STUFF. The compartments are the depth of the drawer, not shallow like the plastic organizers.
Photos are on the Wanderlodgeforum site under Curt...
Details:
Front/Rear Slotted Boards...they are the height & width of the drawer front, made from 8 ply plywood. Dado 1/4" wide slots every 1-1/2".
Boards for the Slots...I used 1/4" MDF cut to length.
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
Read all about Southwest Bluebirds and Friends (SWBB) at http://www.SOUTHWEST-BLUEBIRDS.ORG ...Then Join us.
"Host of the Annual Bluebird Quartzsite Rally"
Organized Utensil Drawer - Eric Perplies - 02-16-2009 14:55
Wow!
Great idea. I'll put it on my project list.
Thanks,
Eric Perplies
96 42 WBWL
currently in Fredericksburg, TX
Organized Utensil Drawer - Curt Sprenger - 02-16-2009 16:12
Eric,
This was one of the few 'no cost' projects...just scrap wood,a table saw, and on-hand 10 bradnails.
On Mon, Feb 16, 2009 at 6:55 PM, Eric Perplies <"purple_ees@hotmail.com"> wrote:
Wow!
Great idea. I'll put it on my project list.
Thanks,
Eric Perplies
96 42 WBWL
currently in Fredericksburg, TX