Looking for Jack Smith - Printable Version +- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com) +-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61) +--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63) +--- Thread: Looking for Jack Smith (/showthread.php?tid=5003)

Looking for Jack Smith - erniecarpet@... - 05-28-2007 07:14 Jack monitors the forum most of the time. Maybe he took memorial day off. Ernie Ekberg 83PT40 Livingston, Mt ************************************** See what's free at http://www.aol.com. [Non-text portions of this message have been removed] Looking for Jack Smith - canuckbird74 - 05-28-2007 10:15 Hi everyone, I'm looking to get intouch with Jack Smith. I have some questions regarding modifcations to the 534 gas engine. Anyone that knows him could you have him contact me. Thanks Doug Watkins Okotoks Canada 74FC31 Looking for Jack Smith - Jon - 05-28-2007 12:39 --- In WanderlodgeForum@yahoogroups.com, "canuckbird74" wrote: > > Hi everyone, > I'm looking to get intouch with Jack Smith. I have some questions > regarding modifcations to the 534 gas engine. Anyone that knows him > could you have him contact me. > Thanks > Doug Watkins > Okotoks Canada > 74FC31 I internet with him and will send you his address. Jon 78 Wanderlodge Bremerton Wa. > Looking for Jack Smith - Mike Hohnstein - 05-28-2007 13:07 Jacks got a 391. Either way, the old industrial Fords are extremely tough to find support parts for. Most problems are related to carb and distributor issues. Rule of thumb is replace the carb with a dual feed vacuum secondary Holley and upgrade the distrbutor with a breakerless kit. There are no aftermarket power enhancement components available for the engine family. MH ----- Original Message ----- From: canuckbird74 To: WanderlodgeForum@yahoogroups.com Sent: Monday, May 28, 2007 4:15 PM Subject: [WanderlodgeForum] Looking for Jack Smith Hi everyone, I'm looking to get intouch with Jack Smith. I have some questions regarding modifcations to the 534 gas engine. Anyone that knows him could you have him contact me. Thanks Doug Watkins Okotoks Canada 74FC31 [Non-text portions of this message have been removed]