Wanderlodge Gurus - The Member Funded Wanderlodge Forum - New LXi and LX Slide Seals, by Dynamic Rubber Inc

Pages: 1 2

Folks,

I worked with Dynamic Rubber Inc to design a new slide seal for our
buses. http://www.dynamicrubber.com/contact.html

We should have 1000' of extrusion in 4 weeks, with the first seals
available in 5 weeks. A prototype seal has already been tested and has
performed flawlessly, sealing the entire air gap around the slide with
no buckling in the corners.

The seals are made of 8 sections: 4 molded corners and 4 straight
sections. The LXi living room seal is priced at $550. Pricing for the
bedroom seals and for the LX seals will be forthcoming.

The seals require the HWH nylon retainer. Initially we'll need to
purchase the retainer from HWH. In the meantime I'll work on finding a
supplier. It is possible to reuse the existing retainer.

Roger Anderson at DRI has agreed to take retail orders - no middleman.
Your getting the seal at cost. Please contact Roger Anderson at DRI to
place orders.

Roger Anderson
Dynamic Rubber, Inc.
131 Garlisch Drive
Elk Grove Village, IL 60007
randerson@...
847.758.0241

David Brady ( No financial interest)
'02 LXi, NC

Outstanding job, David!!! Kudos to you Sir.

Safe travels,

Ralph & Charolette Fullenwider
'84 FC35 "Ruff Diamond"
Duncan, Oklahoma

At 12:29 PM 1/7/2012 -0500, you wrote:
>Folks,
>
>I worked with Dynamic Rubber Inc to design a new slide seal for our
>buses. http://www.dynamicrubber.com/contact.html
>
>We should have 1000' of extrusion in 4 weeks, with the first seals
>available in 5 weeks. A prototype seal has already been tested and has
>performed flawlessly, sealing the entire air gap around the slide with
>no buckling in the corners.
>
>The seals are made of 8 sections: 4 molded corners and 4 straight
>sections. The LXi living room seal is priced at $550. Pricing for the
>bedroom seals and for the LX seals will be forthcoming.
>
>The seals require the HWH nylon retainer. Initially we'll need to
>purchase the retainer from HWH. In the meantime I'll work on finding a
>supplier. It is possible to reuse the existing retainer.
>
>Roger Anderson at DRI has agreed to take retail orders - no middleman.
>Your getting the seal at cost. Please contact Roger Anderson at DRI to
>place orders.
>
>Roger Anderson
>Dynamic Rubber, Inc.
>131 Garlisch Drive
>Elk Grove Village, IL 60007
>randerson@...
>847.758.0241
>
>David Brady ( No financial interest)
>'02 LXi, NC
>
>
>

Will this work on my 2004 M380 also?

Tim O'Neill

701-261-0399

From: Ralph Fullenwider
To: WanderlodgeForum@yahoogroups.com
Sent: Saturday, January 7, 2012 12:35 PM
Subject: Re: [WanderlodgeForum] New LXi and LX Slide Seals, by Dynamic Rubber Inc

Outstanding job, David!!! Kudos to you Sir.

Safe travels,

Ralph & Charolette Fullenwider

'84 FC35 "Ruff Diamond"

Duncan, Oklahoma

At 12:29 PM 1/7/2012 -0500, you wrote:

>Folks,

>

>I worked with Dynamic Rubber Inc to design a new slide seal for our

>buses. http://www.dynamicrubber.com/contact.html

>

>We should have 1000' of extrusion in 4 weeks, with the first seals

>available in 5 weeks. A prototype seal has already been tested and has

>performed flawlessly, sealing the entire air gap around the slide with

>no buckling in the corners.

>

>The seals are made of 8 sections: 4 molded corners and 4 straight

>sections. The LXi living room seal is priced at $550. Pricing for the

>bedroom seals and for the LX seals will be forthcoming.

>

>The seals require the HWH nylon retainer. Initially we'll need to

>purchase the retainer from HWH. In the meantime I'll work on finding a

>supplier. It is possible to reuse the existing retainer.

>

>Roger Anderson at DRI has agreed to take retail orders - no middleman.

>Your getting the seal at cost. Please contact Roger Anderson at DRI to

>place orders.

>

>Roger Anderson

>Dynamic Rubber, Inc.

>131 Garlisch Drive

>Elk Grove Village, IL 60007

>"randerson%40dynamicrubber.com"

>847.758.0241

>

>David Brady ( No financial interest)

>'02 LXi, NC

>

>

>

Thank you Ralph. Although we've never met, I've heard many great
things about you from Ernie and others, and I often look forward to
your column in the FOF's newsletter. Happy New Year to you and your
family! Safe travels to you Sir!

Best regards,

David Brady

'02 LXi, NC

On 1/7/2012 1:35 PM, Ralph Fullenwider wrote:

Outstanding job, David!!! Kudos to you Sir.

Safe travels,

Ralph & Charolette Fullenwider

'84 FC35 "Ruff Diamond"

Duncan, Oklahoma

At 12:29 PM 1/7/2012 -0500, you wrote:

>Folks,

>

>I worked with Dynamic Rubber Inc to design a new slide
seal for our

>buses. http://www.dynamicrubber.com/contact.html

>

>We should have 1000' of extrusion in 4 weeks, with the
first seals

>available in 5 weeks. A prototype seal has already
been tested and has

>performed flawlessly, sealing the entire air gap
around the slide with

>no buckling in the corners.

>

>The seals are made of 8 sections: 4 molded corners and
4 straight

>sections. The LXi living room seal is priced at $550.
Pricing for the

>bedroom seals and for the LX seals will be
forthcoming.

>

>The seals require the HWH nylon retainer. Initially
we'll need to

>purchase the retainer from HWH. In the meantime I'll
work on finding a

>supplier. It is possible to reuse the existing
retainer.

>

>Roger Anderson at DRI has agreed to take retail orders
- no middleman.

>Your getting the seal at cost. Please contact Roger
Anderson at DRI to

>place orders.

>

>Roger Anderson

>Dynamic Rubber, Inc.

>131 Garlisch Drive

>Elk Grove Village, IL 60007

>"randerson%40dynamicrubber.com"

>847.758.0241

>

>David Brady ( No financial interest)

>'02 LXi, NC

>

>

>

Good job David! Even though I don't need them now, thanks for helping to
perpetuate the breed.

Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX

--- In WanderlodgeForum@yahoogroups.com, david brady wrote:
>
> Folks,
>
> I worked with Dynamic Rubber Inc to design a new slide seal for our
> buses. http://www.dynamicrubber.com/contact.html
>
> We should have 1000' of extrusion in 4 weeks, with the first seals
> available in 5 weeks. A prototype seal has already been tested and has
> performed flawlessly, sealing the entire air gap around the slide with
> no buckling in the corners.
>
> The seals are made of 8 sections: 4 molded corners and 4 straight
> sections. The LXi living room seal is priced at $550. Pricing for the
> bedroom seals and for the LX seals will be forthcoming.
>
> The seals require the HWH nylon retainer. Initially we'll need to
> purchase the retainer from HWH. In the meantime I'll work on finding a
> supplier. It is possible to reuse the existing retainer.
>
> Roger Anderson at DRI has agreed to take retail orders - no middleman.
> Your getting the seal at cost. Please contact Roger Anderson at DRI to
> place orders.
>
> Roger Anderson
> Dynamic Rubber, Inc.
> 131 Garlisch Drive
> Elk Grove Village, IL 60007
> randerson@...
> 847.758.0241
>
> David Brady ( No financial interest)
> '02 LXi, NC
>

"Good job David! Even though I don't need them now, thanks for
helping to perpetuate the breed.

Mike Bulriss"

Thanks Mike, I really appreciate that. My goal is a great seal at a
great price for these great birds!

On 1/7/2012 1:43 PM, Tim O'Neill wrote:

ÃÂ

Will this work on my 2004 M380 also?

Tim O'Neill

701-261-0399

Hi Tim,

No this particular seal profile will only work on the LX and LXi
living room and bedroom slides. Don't despair, I'm currently working
on an M380 design.

Here's a photo album I put together which shows the seal profile,
the nylon retainer, and the installed prototype seal.

https://picasaweb.google.com/dmb2000/DR2FOFPhotos#

Best,

David Brady

'02 LXi, NC

DavidÂ

Your contribution to the Wanderlodge community continues to and has always been generous.Â

Even though I currently don't have a slide it is great to know a solution is out there and we have a true professional with the skills to invent new solutions. Very few of us can do that.Â

Thanks!

Gary

Gary, you're too kind, stop it or my wife will never be able to live
with me! Happy New Year!

take care,

david brady

'02 LXi, NC

On 1/7/2012 3:36 PM, G Boyd wrote:

David

Your contribution to the Wanderlodge community
continues to and has always been generous.

Even though I currently don't have a slide it is great
to know a solution is out there and we have a true
professional with the skills to invent new solutions. Very
few of us can do that.

Thanks!

Gary

--- In WanderlodgeForum@yahoogroups.com, Tim O'Neill wrote:
>
> Will this work on my 2004 M380 also?
> Tim O'Neill
> 701-261-0399

Wont work on the M380's Tim!

Robert Britton
2004 M380
Hollister, California

Hi Robert,

I now have a section of the M380 OEM air seal and I plan to get
together with Jim Brookshire to take some measurements of his M380.
It'd be great to have a section of the M380 track and retainer. If
anyone has something lying around please let me know. An M380 seal
is in the works!

david brady

'02 LXi, NC

On 1/7/2012 10:21 PM, Robert Britton wrote:

--- In "WanderlodgeForum%40yahoogroups.com",
Tim O'Neill "oneillfurn15@..." wrote:

>

> Will this work on my 2004 M380 also?

> Tim O'Neill

> 701-261-0399

Wont work on the M380's Tim!

Robert Britton

2004 M380

Hollister, California

Pages: 1 2

Wanderlodge Gurus - The Member Funded Wanderlodge Forum

david brady

Ralph Fullenwider

Tim O'Neill

david brady

mbulriss

david brady

G Boyd

david brady

Robert Britton

david brady