Hello, Does anyone know the sizes and poundage we would need for our 1988 pt40
for the engine compartment door? Old ones are wore out and can see no numbers
on them. I looked on ORr&Orr webiste but am having a difficult time determining
which ones are the correct replacement. Any help or suggestions would be
greatly appreciated!
Thank you!
Robert Rahn
Kalispell, MT
I need these for my 90PT as well and have had the same difficulty.
Donn
On 8/29/11 6:41 PM, "chaunceyboyblu" wrote:
> Hello, Does anyone know the sizes and poundage we would need for our 1988 pt40
> for the engine compartment door? Old ones are wore out and can see no numbers
> on them. I looked on ORr&Orr webiste but am having a difficult time
> determining which ones are the correct replacement. Any help or suggestions
> would be greatly appreciated!
>
> Thank you!
>
> Robert Rahn
> Kalispell, MT
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
Hi Robert,
On an 88, they are probably Stabilus gas struts. There should be a series of
numbers on each strut cylinder, but they can be hard to see. I had to search
for them on the bay door struts as they all seemed to be facing the wrong way.
Orr and Orr can match them from those part numbers.
Or you can contact Stabilus at
Stabilus Inc.
1201 Tulip Drive
Gastonia, NC 28052
Tel. 704 865 7444
Fax 704 865 7781
They will point you to a distributor as they don't sell direct.
Then again, there is always Parliament Coach.
Please post your part number when you find it.
Thanks,
Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX
--- In
WanderlodgeForum@yahoogroups.com, "chaunceyboyblu"
wrote:
>
> Hello, Does anyone know the sizes and poundage we would need for our 1988 pt40
for the engine compartment door? Old ones are wore out and can see no numbers
on them. I looked on ORr&Orr webiste but am having a difficult time determining
which ones are the correct replacement. Any help or suggestions would be
greatly appreciated!
>
> Thank you!
>
> Robert Rahn
> Kalispell, MT
>
Here are the numbers off my 130# struts.
Stabilus
1686ES
1000N
322/05 A2
FAN122V
Hope this helps.
Bob Lawrence
84 PT36
Back in Washington state
--- In
WanderlodgeForum@yahoogroups.com, "mbulriss" <mbulriss@...> wrote:
>
> Hi Robert,
>
> On an 88, they are probably Stabilus gas struts. There should be a series of
numbers on each strut cylinder, but they can be hard to see. I had to search
for them on the bay door struts as they all seemed to be facing the wrong way.
Orr and Orr can match them from those part numbers.
>
> Or you can contact Stabilus at
> Stabilus Inc.
> 1201 Tulip Drive
> Gastonia, NC 28052
> Tel. 704 865 7444
> Fax 704 865 7781
>
> They will point you to a distributor as they don't sell direct.
>
> Then again, there is always Parliament Coach.
>
> Please post your part number when you find it.
>
> Thanks,
>
> Mike Bulriss
> 1991 WB40 "Texas Minivan"
> San Antonio, TX
>
>
>
> --- In
WanderlodgeForum@yahoogroups.com, "chaunceyboyblu"
wrote:
> >
> > Hello, Does anyone know the sizes and poundage we would need for our 1988
pt40 for the engine compartment door? Old ones are wore out and can see no
numbers on them. I looked on ORr&Orr webiste but am having a difficult time
determining which ones are the correct replacement. Any help or suggestions
would be greatly appreciated!
> >
> > Thank you!
> >
> > Robert Rahn
> > Kalispell, MT
> >
>