Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Anyone know of a good source out west to pick up a new or rebuilt 3208 starter?
My service sheet says the original was a Delco 1114826. I can find that starter
with a Web search, but the source is on the east coast and says it is the
starter for some kind of 3208-powered industrial equipment.

Bob Griesel '84 FC31 WLII

Thanks Fred!

--- In WanderlodgeForum@yahoogroups.com, "Fred Hulse" wrote:
>
> Hi Bob,
>
> The little info I have says that part number is very common on Cat engines
> http://www.dixie-electric.com/catalog/Di...Series.pdf
>
> I use this website a lot when I need information.
> They show Caterpillar numbers to Delco numbers and a wealth of info.
>
> I’m not certain how you source stuff,but any good truck electric should
supply it,even NAPA
>
> Fred Hulse
> Morristown,Arizona
> 97 WLWB41
>

Hi Bob,

I'm not sure where you are located, but I had mine rebuilt last year here in
Dallas. I found the starter place that I've used for other starters could handle
the big Cat starter.

Anyway, I can look up the contact information if something here helps you.
Otherwise you might find out like I did that your local starter rebuilder can
help you out.

alan
87FC35 in Dallas

--- In WanderlodgeForum@yahoogroups.com, "freewill2008" wrote:
>
> Anyone know of a good source out west to pick up a new or rebuilt 3208
starter? My service sheet says the original was a Delco 1114826. I can find
that starter with a Web search, but the source is on the east coast and says it
is the starter for some kind of 3208-powered industrial equipment.
>
> Bob Griesel '84 FC31 WLII
>

Thanks Alan. NAPA fixed me up with a reman. Its in and working fine.

Bob Griesel '84 FC31 WLII WA

--- In WanderlodgeForum@yahoogroups.com, "xz3kg7" wrote:
>
> Hi Bob,
>
> I'm not sure where you are located, but I had mine rebuilt last year here in
Dallas. I found the starter place that I've used for other starters could handle
the big Cat starter.
>
> Anyway, I can look up the contact information if something here helps you.
Otherwise you might find out like I did that your local starter rebuilder can
help you out.
>
> alan
> 87FC35 in Dallas
>
> --- In WanderlodgeForum@yahoogroups.com, "freewill2008" wrote:
> >
> > Anyone know of a good source out west to pick up a new or rebuilt 3208
starter? My service sheet says the original was a Delco 1114826. I can find
that starter with a Web search, but the source is on the east coast and says it
is the starter for some kind of 3208-powered industrial equipment.
> >
> > Bob Griesel '84 FC31 WLII
> >
>