Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Full Version: CC5 Air Cylinder
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

Ernie E

I get no throttle power and have ordered a maintainence kit for this cylinder.
Does anyone have a schematic that shows the workings of this cylinder. I get NO
smoke when I try to accelerate, thus equals NO power. It will air up and oil and
water are fine. Thanks, Ernie- 83PT40 in Texas

Curt Sprenger

Ernie,
See page 8. Sent to your private email. I believe I uploaded this to the Wanderlodge site a couple years back.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA





On Tue, Aug 10, 2010 at 2:56 PM, Ernie E <"ernietex@yahoo.com"> wrote:
 


I get no throttle power and have ordered a maintainence kit for this cylinder. Does anyone have a schematic that shows the workings of this cylinder. I get NO smoke when I try to accelerate, thus equals NO power. It will air up and oil and water are fine. Thanks, Ernie- 83PT40 in Texas



mcmike1952

Ernie, Make sure the high idle switch is not on. Mike

--- In WanderlodgeForum@yahoogroups.com, "Ernie E" wrote:
>
> I get no throttle power and have ordered a maintainence kit for this cylinder.
Does anyone have a schematic that shows the workings of this cylinder. I get NO
smoke when I try to accelerate, thus equals NO power. It will air up and oil and
water are fine. Thanks, Ernie- 83PT40 in Texas
>

Ernie Ekberg

made sure of that and also made sure my Jake was off


Ernie Ekberg
83PT40
Wanderlodge
Weatherford, Tx 817-475-3991

--- On Wed, 8/11/10, mcmike1952 <mmcmahan1952@...> wrote:

From: mcmike1952 <mmcmahan1952@...>
Subject: [WanderlodgeForum] Re: CC5 Air Cylinder
To: WanderlodgeForum@yahoogroups.com
Date: Wednesday, August 11, 2010, 10:20 AM


Ernie, Make sure the high idle switch is not on. Mike

--- In WanderlodgeForum@yahoogroups.com, "Ernie E" wrote:
>
> I get no throttle power and have ordered a maintainence kit for this cylinder. Does anyone have a schematic that shows the workings of this cylinder. I get NO smoke when I try to accelerate, thus equals NO power. It will air up and oil and water are fine. Thanks, Ernie- 83PT40 in Texas
>

Reference URL's
  • Wanderlodge Gurus - The Member Funded Wanderlodge Forum: http://www.wanderlodgegurus.com/index.php
  • :