Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Hi gang,

Hoping someone can help us out here. I am due to fly to FL a week from today to
pick up my new to me 82 PT40. The current owner just contacted me to say he is
having an issue with the engine oil pressure gauge and engine temperature gauge
- both have stopped working. He says he contacted the gauge manufacturer
(Teleflex) who say they only made them and the corresponding senders in 82 and
83. He now bought new Stewart Warner gauges and sending units, hoping he can
replace them and cure the problem. But he can't find the actual location of
these 2 sending units. Can anyone help us out so we can get this resolved?

Thanks!
Markus
82 PT40 - needing help right now!
_________________________________________________________________
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/then...WL:en\
-US:WM_HMP:042010_3

Ernie,

Thanks, that helped. He found the oil sender on the inner frame rail, away from
the engine. He says he'll replace that with the new gauge tonight and see what
happens.

Thanks,
Markus


________________________________
> To: WanderlodgeForum@yahoogroups.com
> From: ernietex@...
> Date: Fri, 23 Apr 2010 08:55:26 -0700
> Subject: Re: [WanderlodgeForum] Help needed - 82 PT40 sender locations
>
> Markus- the oil sender is on the lower rear of engine on curb side about a
foot inboard
>
> water, I believe is at eye level-curb side on rear
>
>
> Ernie Ekberg
>
> 83PT40
>
> Wanderlodge
>
> Weatherford, Tx 817-475-3991
>
> http://www.ernieekbergflooring.net
>
>
> --- On Fri, 4/23/10, Markus Meyer wrote:
>
>
> From: Markus Meyer
> Subject: [WanderlodgeForum] Help needed - 82 PT40 sender locations
> To: wanderlodgeforum@yahoogroups.com
> Date: Friday, April 23, 2010, 10:50 AM
>
>
>
>
>
>
> Hi gang,
>
> Hoping someone can help us out here. I am due to fly to FL a week from today
to pick up my new to me 82 PT40. The current owner just contacted me to say he
is having an issue with the engine oil pressure gauge and engine temperature
gauge - both have stopped working. He says he contacted the gauge manufacturer
(Teleflex) who say they only made them and the corresponding senders in 82 and
83. He now bought new Stewart Warner gauges and sending units, hoping he can
replace them and cure the problem. But he can't find the actual location of
these 2 sending units. Can anyone help us out so we can get this resolved?
>
> Thanks!
> Markus
> 82 PT40 - needing help right now!
> ____________ _________ _________ _________ _________ _________ _
> The New Busy is not the old busy. Search, chat and e-mail from your inbox.
> http://www.windowsl ive.com/campaign /thenewbusy? ocid=PID28326: :T:WLMTAGL:
ON:WL:en- US:WM_HMP: 042010_3
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/then...WL:en\
-US:WM_HMP:042010_1

Thanks Ernie - he found them, replaced both sensor and gauges, and at least for
the moment, everything is working again!

Markus
________________________________
> To: WanderlodgeForum@yahoogroups.com
> From: ernietex@...
> Date: Fri, 23 Apr 2010 08:55:26 -0700
> Subject: Re: [WanderlodgeForum] Help needed - 82 PT40 sender locations
>
> Markus- the oil sender is on the lower rear of engine on curb side about a
foot inboard
>
> water, I believe is at eye level-curb side on rear
>
>
> Ernie Ekberg
>
> 83PT40
>
> Wanderlodge
>
> Weatherford, Tx 817-475-3991
>
> http://www.ernieekbergflooring.net
>
>
> --- On Fri, 4/23/10, Markus Meyer wrote:
>
>
> From: Markus Meyer
> Subject: [WanderlodgeForum] Help needed - 82 PT40 sender locations
> To: wanderlodgeforum@yahoogroups.com
> Date: Friday, April 23, 2010, 10:50 AM
>
>
>
>
>
>
> Hi gang,
>
> Hoping someone can help us out here. I am due to fly to FL a week from today
to pick up my new to me 82 PT40. The current owner just contacted me to say he
is having an issue with the engine oil pressure gauge and engine temperature
gauge - both have stopped working. He says he contacted the gauge manufacturer
(Teleflex) who say they only made them and the corresponding senders in 82 and
83. He now bought new Stewart Warner gauges and sending units, hoping he can
replace them and cure the problem. But he can't find the actual location of
these 2 sending units. Can anyone help us out so we can get this resolved?
>
> Thanks!
> Markus
> 82 PT40 - needing help right now!
> ____________ _________ _________ _________ _________ _________ _
> The New Busy is not the old busy. Search, chat and e-mail from your inbox.
> http://www.windowsl ive.com/campaign /thenewbusy? ocid=PID28326: :T:WLMTAGL:
ON:WL:en- US:WM_HMP: 042010_3
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/then...326::\
T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4