My '90 SP-36 has a bad contactor in the AC transfer switch. The switch was made
by Todd Engineering, now out of business. The contactor has their name on it
with a part # TES-350. Does anyone here know the manufacturer and perhaps a
cross reference? I've been Googling for two hours with no success.
Thanks
Paul Cunningham
Virginia
1990 SP-36
Paul,
I had to replace my transfer switch and somehow, Ryan at Mr. Olivers managed to find the proper circuit board. His number is 972-562-8008. Also, Ralph Fullenwider knows where to get replacements.
Brad Barton (former LXi owner)
"bbartonwx@hotmail.com"
To:
WanderlodgeForum@yahoogroups.com
From: bluebirdsp36@...
Date: Fri, 18 Dec 2009 03:01:28 +0000
Subject: [WanderlodgeForum] AC Transfer Switch
My '90 SP-36 has a bad contactor in the AC transfer switch. The switch was made by Todd Engineering, now out of business. The contactor has their name on it with a part # TES-350. Does anyone here know the manufacturer and perhaps a cross reference? I've been Googling for two hours with no success.
Thanks
Paul Cunningham
Virginia
1990 SP-36
Hotmail: Trusted email with Microsoftâs powerful SPAM protection.
Sign up now.
Here's the link Ralph was talking about:
http://www.mccampingsupplies.com/index.p..._613_\
894&products_id=14263
$223.68
Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX
--- In
WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider"
wrote:
>
> Hi Paul:
>
> I put a replacement AT switch info on the Forum in the Parts folder I
> believe. It is made my Lyght Systems. The contractors in the Todd looked to
> be Cutler Hammer and the contacts in those are replaceable but I had never
> found a rebuild kit for them. The rebuild kits would be a set of contacts,
> and new spring with a keeper. From experience in electrical pannels, if one
> set has arced then the other is ready as well.
>
> The guts of the Lyght unit is identical to the Todd but the box is larger
> so I swapped boxes and it is a good retrofit.
>
> Safe travels,
>
> Ralph and Charolette Fullenwider
> "84FC35 "Ruff Diamond"
> Duncan, Oklahoma
>
> At 03:01 AM 12/18/2009 +0000, you wrote:
> >My '90 SP-36 has a bad contactor in the AC transfer switch. The switch was
> >made by Todd Engineering, now out of business. The contactor has their
> >name on it with a part # TES-350. Does anyone here know the manufacturer
> >and perhaps a cross reference? I've been Googling for two hours with no
> >success.
> >
> >Thanks
> >
> >Paul Cunningham
> >Virginia
> >1990 SP-36
> >
> >
> >
>
Hi Paul:
I put a replacement AT switch info on the Forum in the Parts folder I
believe. It is made my Lyght Systems. The contractors in the Todd looked to
be Cutler Hammer and the contacts in those are replaceable but I had never
found a rebuild kit for them. The rebuild kits would be a set of contacts,
and new spring with a keeper. From experience in electrical pannels, if one
set has arced then the other is ready as well.
The guts of the Lyght unit is identical to the Todd but the box is larger
so I swapped boxes and it is a good retrofit.
Safe travels,
Ralph and Charolette Fullenwider
"84FC35 "Ruff Diamond"
Duncan, Oklahoma
At 03:01 AM 12/18/2009 +0000, you wrote:
>My '90 SP-36 has a bad contactor in the AC transfer switch. The switch was
>made by Todd Engineering, now out of business. The contactor has their
>name on it with a part # TES-350. Does anyone here know the manufacturer
>and perhaps a cross reference? I've been Googling for two hours with no
>success.
>
>Thanks
>
>Paul Cunningham
>Virginia
>1990 SP-36
>
>
>
Thanks Mike, I just put XP on my old computer and of course have not got
everything back in yet, including parts.
Ralph
Safe travels,
Ralph and Charolette Fullenwider
"84FC35 "Ruff Diamond"
Duncan, Oklahoma
At 04:31 AM 12/18/2009 +0000, you wrote:
>Here's the link Ralph was talking about:
>
>http://www.mccampingsupplies.com/index.p...9_613\
_894&products_id=14263
>
>$223.68
>
>Mike Bulriss
>1991 WB40 "Texas Minivan"
>San Antonio, TX
>
>
>
>
>
>
>--- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider"
> wrote:
> >
> > Hi Paul:
> >
> > I put a replacement AT switch info on the Forum in the Parts folder I
> > believe. It is made my Lyght Systems. The contractors in the Todd
> looked to
> > be Cutler Hammer and the contacts in those are replaceable but I had never
> > found a rebuild kit for them. The rebuild kits would be a set of contacts,
> > and new spring with a keeper. From experience in electrical pannels, if
> one
> > set has arced then the other is ready as well.
> >
> > The guts of the Lyght unit is identical to the Todd but the box is larger
> > so I swapped boxes and it is a good retrofit.
> >
> > Safe travels,
> >
> > Ralph and Charolette Fullenwider
> > "84FC35 "Ruff Diamond"
> > Duncan, Oklahoma
> >
> > At 03:01 AM 12/18/2009 +0000, you wrote:
> > >My '90 SP-36 has a bad contactor in the AC transfer switch. The switch
> was
> > >made by Todd Engineering, now out of business. The contactor has their
> > >name on it with a part # TES-350. Does anyone here know the manufacturer
> > >and perhaps a cross reference? I've been Googling for two hours with no
> > >success.
> > >
> > >Thanks
> > >
> > >Paul Cunningham
> > >Virginia
> > >1990 SP-36
> > >
> > >
>
Thanks Brad, Ralph & Mike for the help. I ended up taking the contactor apart
and honeing the contacts. Works great but for how long, I know not.
Paul Cunningham
1990 SP-36
Virginia
> Here's the link Ralph was talking about:
>
>
http://www.mccampingsupplies.com/index.p..._613_\
894&products_id=14263
>
> $223.68
>
> Mike Bulriss
> 1991 WB40 "Texas Minivan"
> San Antonio, TX
>
>