I'm having some issues trying to find the correct replacements for the cargo bay
and interior gas springs.
I have the numbers FMR115 and FBN12C off the existing ones, but they don't cross
reference anywhere
I know that the H9412 is a replacement for the interior ... but what about the
exterior one ? What kind of thrust lbs should I use ?
It's an '86 PT40 ...
THANKS !!
Orr and Orr is the place to got for these...
http://www.orrorr.com/
Give them a call. I replaced pretty much all of them on my '87 PT40 with springs from them.
HTH, Joe
On Mon, Nov 30, 2009 at 9:02 PM, zboy59
<"martys@title-check.com"> wrote:
Â
I'm having some issues trying to find the correct replacements for the cargo bay and interior gas springs.
I have the numbers FMR115 and FBN12C off the existing ones, but they don't cross reference anywhere
I know that the H9412 is a replacement for the interior ... but what about the exterior one ? What kind of thrust lbs should I use ?
It's an '86 PT40 ...
THANKS !!
Switch to: "WanderlodgeForum-traditional@yahoogroups.com?subject=Change+Delivery+Format:+Traditional", "WanderlodgeForum-digest@yahoogroups.com?subject=Email+Delivery:+Digest" ⢠"WanderlodgeForum-unsubscribe@yahoogroups.com?subject=Unsubscribe" â¢
Terms of Use
.
Greetings:
Look for the force numbers on yours in the middle of the sequence of digits near
the "F" number: on my exterior Stabilus units a typical example is "1657EE 0500N
307/09 A 5" which is a 500 Newton (metric unit of force) or about 110 lbs unit.
The interior springs on my '87 were replaced by a previous owner with Supra 9"
35lb units. I recently replaced the exterior springs with FBN12K 500 Newton
(~110 lb) Stabilus units from Orr and Orr.
M.R.Kane
1987 PT40
currently Terrell, TX
--- In
WanderlodgeForum@yahoogroups.com, "zboy59"
wrote:
>
> I'm having some issues trying to find the correct replacements for the cargo
bay and interior gas springs.
>
> I have the numbers FMR115 and FBN12C off the existing ones, but they don't
cross reference anywhere
>
> I know that the H9412 is a replacement for the interior ... but what about the
exterior one ? What kind of thrust lbs should I use ?
>
> It's an '86 PT40 ...
>
> THANKS !!
>