I have the original perkins gas gen in my 79fc35. tried to start it the
other day. The starter sometimes just spins without engaging. I took it
off and tested it with a battery. It spins ok but the mechanism that
pops out to engage the teeth to the engine doesn't pop out. Am I
testing this correctly? Any tech tips on rebuilding this? Also, where
can I get carb kit, and other parts? I have a 4k gen from my first RV
but don't want to swap out because the perkins puts out more juice. Am
I wasting my time?
Mario Barrios
Orange County, CALIF
'79FC35
Mario,
Sorry, I can't help with the starter. What city in Orange County are you
located?
Curt Sprenger â87PT38, Anaheim, Calif.
iwhotoo wrote:
> I have the original perkins gas gen in my 79fc35. tried to start it the
> other day. The starter sometimes just spins without engaging. I took it
> off and tested it with a battery. It spins ok but the mechanism that
> pops out to engage the teeth to the engine doesn't pop out. Am I
> testing this correctly? Any tech tips on rebuilding this? Also, where
> can I get carb kit, and other parts? I have a 4k gen from my first RV
> but don't want to swap out because the perkins puts out more juice. Am
> I wasting my time?
>
> Mario Barrios
> Orange County, CALIF
> '79FC35
>
>
>
> ------------------------------------------------------------------------
> *Yahoo! Groups Links*
>
> * To visit your group on the web, go to:
>
http://groups.yahoo.com/group/WanderlodgeForum/
> * To unsubscribe from this group, send an email to:
>
WanderlodgeForum-unsubscribe@yahoogroups.com
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/>.
>
>
--
Take your starter to any starter/alternator repair shop and they will
install a new bendix or you can take the bendix off the shaft and take it
to NAPA and they will give you one like it.
PS: I dont think you have a Perkins generator if its gas. More then likely
either a Kohler or an Onan.
tom
1982 FC35
Vernon Center,NYAt 03:26 PM 6/17/2005 +0000, you wrote:
>I have the original perkins gas gen in my 79fc35. tried to start it the
>other day. The starter sometimes just spins without engaging. I took it
>off and tested it with a battery. It spins ok but the mechanism that
>pops out to engage the teeth to the engine doesn't pop out. Am I
>testing this correctly? Any tech tips on rebuilding this? Also, where
>can I get carb kit, and other parts? I have a 4k gen from my first RV
>but don't want to swap out because the perkins puts out more juice. Am
>I wasting my time?
>
>Mario Barrios
>Orange County, CALIF
>'79FC35
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>