Is there any call for the plastic roof strips found on older fcs and narrow body
pts up to 1989 model year
these strips hold the roof and wall panels in place They will be produced by the
same company that made them for Wanderlodge
there has to be significant interest because there is a large investment to be
made
Stephen 77fc35
dupreeproducts.com
I would be interested in some for my 77FC35 depending on the cost. Can you give any estimate of what they are likely to cost?
Regards,
Dorn Hetzel
77FC35
Hogansville, GA
On Fri, Mar 20, 2009 at 10:34 AM, Stephen Birtles
<"cape0001@hotmail.com"> wrote:
Is there any call for the plastic roof strips found on older fcs and narrow body pts up to 1989 model year
these strips hold the roof and wall panels in place They will be produced by the same company that made them for Wanderlodge
there has to be significant interest because there is a large investment to be made
Stephen 77fc35
dupreeproducts.com
They are an extruded plastic piece it is not possible to vary the width without
building another mold and that is unlikely to happen.
The strips will be 90 inches long and will ship 10 in a tube
Right now if it does not change they will be priced at 90.00 for ten larger
quantities will be priced lower that will be set later
Stephen 77fc35
dupreeproducts.com
--- In
WanderlodgeForum@yahoogroups.com, david edwards
wrote:
>
> Is it possible to get the plastic roof strips in slightly wider versions?Â
Some of mine don't quite cover the edge of the ceiling panels.
>
> Kerry
> 82 FC 35
> Denver
>
Steven...$90.00 for ten is a good buy.
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
Read all about Southwest Bluebirds and Friends (SWBB) at http://www.SOUTHWEST-BLUEBIRDS.ORG ...Then Join us.
"Host of the Annual Bluebird Quartzsite Rally"
On Fri, Mar 20, 2009 at 3:14 PM, Stephen Birtles
<"cape0001@hotmail.com"> wrote:
They are an extruded plastic piece it is not possible to vary the width without building another mold and that is unlikely to happen.
The strips will be 90 inches long and will ship 10 in a tube
Right now if it does not change they will be priced at 90.00 for ten larger quantities will be priced lower that will be set later
Stephen 77fc35
dupreeproducts.com
--- In "WanderlodgeForum%40yahoogroups.com", david edwards
wrote:
>
> Is it possible to get the plastic roof strips in slightly wider versions?ÃÂ Some of mine don't quite cover the edge of the ceiling panels.
>
> Kerry
> 82 FC 35
> Denver
>
Stephen,
That's a great price. I bought eight for my FC33 about five years ago from Bluebird. By adding in inflation and availability and you right on the mark.
Chet Geist
1981/FC33, Austin, Texas
They are an extruded plastic piece it is not possible to vary the width without building another mold and that is unlikely to happen.
The strips will be 90 inches long and will ship 10 in a tube
Right now if it does not change they will be priced at 90.00 for ten larger quantities will be priced lower that will be set later
Stephen 77fc35
dupreeproducts.com
--- In "WanderlodgeForum%40yahoogroups.com", david edwards ...> wrote:
>
> Is it possible to get the plastic roof strips in slightly wider versions? Some of mine don't quite cover the edge of the ceiling panels.
>
> Kerry
> 82 FC 35
> Denver
>
Stephen
I will take a set when they are availible.
Chuck Somers
81FCSB
cfsomers-iserv.net
> --- In
WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
> wrote:
>>
>> Is there any call for the plastic roof strips found on older fcs and
>> narrow body pts up to 1989 model year
>> these strips hold the roof and wall panels in place They will be
>> produced by the same company that made them for Wanderlodge
>> there has to be significant interest because there is a large investment
>> to be made
>>
>> Stephen 77fc35
>> dupreeproducts.com
>>
> I have a 1985 with a bone colored ceiling and strips. Several of my strips
> are cracking from age. Would be interested to hear more. Thanks
>
> Sam Powers
> 1985 PT-40
> Lexington,Ohio 44904
>
>