Curt Sprenger
02-16-2009, 05:09
The Utensil Drawer in our coach was pretty much always a mess. Using those low profile plastic organizers helped some but still a mess. It was time to organize the drawer my way. First I used vertical slotted boards at the forward and rear of the drawer. Next I used 1/4" thick boards that fit into those slots. Now the drawer is organized, and there is room for more STUFF. The compartments are the depth of the drawer, not shallow like the plastic organizers.
Photos are on the Wanderlodgeforum site under Curt...
Details:
Front/Rear Slotted Boards...they are the height & width of the drawer front, made from 8 ply plywood. Dado 1/4" wide slots every 1-1/2".
Boards for the Slots...I used 1/4" MDF cut to length.
Photos are on the Wanderlodgeforum site under Curt...
Details:
Front/Rear Slotted Boards...they are the height & width of the drawer front, made from 8 ply plywood. Dado 1/4" wide slots every 1-1/2".
Boards for the Slots...I used 1/4" MDF cut to length.
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
Read all about Southwest Bluebirds and Friends (SWBB) at http://www.SOUTHWEST-BLUEBIRDS.ORG ...Then Join us.
"Host of the Annual Bluebird Quartzsite Rally"