akav8r
02-04-2009, 15:19
THANKS guys for the input. I do have a GFI breaker, my button is
white(we'll let that slide this time)I am familiar with these but had
totally missed that. One more thing down!!!!!!!!!
As for the switch over the beds, it has no light and is a flat rocker
type switch. My engine heater switch is located in the front of the
co-pilot seat near the floor and is red lighted.
I have no outlet at the foot end of the bed, however I have one at
the head end but alas it is not controled by this switch.
The outlet in the closet is also still inop and it is the male plug
that is hanging loose with no home behind the fridge. I "think" all
of my heat tapes were plugged in under the kitchen sink and the bath
vanity.
Keep the ideas coming and THANKS again.
Wendel, GA
82 fc35sb
"Change of Venue"
white(we'll let that slide this time)I am familiar with these but had
totally missed that. One more thing down!!!!!!!!!
As for the switch over the beds, it has no light and is a flat rocker
type switch. My engine heater switch is located in the front of the
co-pilot seat near the floor and is red lighted.
I have no outlet at the foot end of the bed, however I have one at
the head end but alas it is not controled by this switch.
The outlet in the closet is also still inop and it is the male plug
that is hanging loose with no home behind the fridge. I "think" all
of my heat tapes were plugged in under the kitchen sink and the bath
vanity.
Keep the ideas coming and THANKS again.
Wendel, GA
82 fc35sb
"Change of Venue"