Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Pages: 1 2

Do those sharps have a flat stainless bottom to cope with being mounted in the heat over the stove?

Dorn Hetzel
77FC35
Hogansville, GA

On Mon, Jan 26, 2009 at 5:58 PM, Henry Jay Hannigan <"hank_87us@yahoo.com"> wrote:

---I replaced mine with a Stainless Sharp also like Leroy but ALL

BLACK and $80 less would have been OK because only a small amount of

side stainless shows......Sharp is very good.

Regards,

Hank Hannigan in Melbourne down under for summer

90SP36 Istored in Vegas)

In "WanderlodgeForum%40yahoogroups.com", Leroy Eckert

wrote:

>

> My 15 year old Sharp failed and I replaced it with an new Stainless

Sharp, about $500 at the time. The new one is miles ahead of the old

one in efficiency according to the wife.

> Leroy Eckert

> 1990 WB-40 Smoke N Mirrors

> Dahlonega, GA

> Royale Conversion

>

> --- On Sun, 1/25/09, jburgessx2 wrote:

> From: jburgessx2

> Subject: [WanderlodgeForum] Re: Convection/Microwave

> To: "WanderlodgeForum%40yahoogroups.com"

> Date: Sunday, January 25, 2009, 6:40 PM

>

>

>

>

>

>

>

>

>

>

>

> Jay,

>

>

>

> That's good to know. I know I had a Sharp in my Beaver and it was

a

>

> top notch microwave/convectio n oven and still runs strong today

after

>

> 20+ years.

>

>

>

> Jerry

>

> 1985 PT 40

>

>

>

> --- In WanderlodgeForum@ yahoogroups. com, "Jay Darst"

>

> wrote:

>

> >

>

> > I replaced my Sharp with a Dacor DCM24S.

>

> >

>

> > Fits nicely, needed a 1/2" shim(plywood with hardwood trim pc to

>

> look

>

> > like the rest of the Bird)

>

> >

>

> > Works great. Dam near all convection/microwav es are made by

SHARP.

>

> So

>

> > don't blow a bunch of money on DACOR or VIKING, they are made by

>

> > SHARP.

>

> >

>

> > Of course I didn't learn that until I had bought the DACOR($850)

>

> for

>

> > the Bird and VIKING($1,500) for the house. They are the same

except

>

> > the hood ornament.... Daaa..... Live and learn

>

> >

>

> > Jay Darst

>

> > 85PT40

>

> > 91Prevost Royale 40XL for sale

>

> > Sullivan, IL

>

> >

>

> > --- In WanderlodgeForum@ yahoogroups. com, "jburgessx2"

>

> > wrote:

>

> > >

>

> > > Ralph,

>

> > >

>

> > > Thanks a bunch. I really like this old Bird and I want to get

it

>

> > > back into shape. We full time and can't live without the

oven.

>

> I

>

> > > appreciate your help!

>

> > >

>

> > > Jerry

>

> > > 1985 PT40

>

> > >

>

> > > --- In WanderlodgeForum@ yahoogroups. com, "Ralph L.

Fullenwider"

>

> > > wrote:

>

> > > >

>

> > > > Hi Jerry and congrats on your Bird.

>

> > > >

>

> > > > Check out the Sharp 930 convection/microwav e it is 18.8

deep,

>

> > 14.9

>

> > > high and

>

> > > > 25 wide and fits like a glove, and a good unit.

>

> > > >

>

> > > > Safe travels,

>

> > > >

>

> > > > Ralph and Charolette Fullenwider

>

> > > > 84FC35 "Ruff Diamond"

>

> > > > Duncan, Oklahoma

>

> > > >

>

> > > > At 04:13 PM 1/25/2009 +0000, you wrote:

>

> > > > >I've just purchased my first Bird and am looking for some

>

> help.

>

> > > The

>

> > > > >original microwave/convectio n oven was broken so the

previous

>

> > owner

>

> > > > >installed just a microwave in it's place. I would like to

>

> have

>

> > the

>

> > > > >convection portion back because there isn't any other oven

>

> > > installed.

>

> > > > >I like my baked goods and the wife want's her oven back!

>

> > > > >

>

> > > > >Has anyone else had this problem? What model/brand

>

> > > > >microwave/convecti on oven will fit in the original hole on

a

>

> 1985

>

> > > > >PT40? Any help would be greatly appreciated.

>

> > > > >

>

> > > > >If no one knows, I can always do the measurements and search

>

> > > myself.

>

> > > > >But, I thought someone may have already been down this road.

>

> > > > >

>

> > > > >Thanks. Jerry

>

> > > > >1985 PT40

>

> > > > >

>

> > > > >

>

> > > >

>

> > >

>

> >

>

Purchase the model with the exhaust fan and lights in the bottom.
Jenn-Air also makes a model that fits well. It mounts differently though.

R.E. (Ron) Marabito, Dallas, TX 92WB40

--- In WanderlodgeForum@yahoogroups.com, Dorn Hetzel wrote:
>
> Do those sharps have a flat stainless bottom to cope with being
mounted in
> the heat over the stove?
>
> Dorn Hetzel
> 77FC35
> Hogansville, GA
>
> On Mon, Jan 26, 2009 at 5:58 PM, Henry Jay Hannigan
wrote:
>
> > ---I replaced mine with a Stainless Sharp also like Leroy but ALL
> > BLACK and $80 less would have been OK because only a small amount of
> > side stainless shows......Sharp is very good.
> > Regards,
> > Hank Hannigan in Melbourne down under for summer
> > 90SP36 Istored in Vegas)
> >
> > In WanderlodgeForum@yahoogroups.com
,
> > Leroy Eckert
> > wrote:
> >
> > >
> > > My 15 year old Sharp failed and I replaced it with an new Stainless
> > Sharp, about $500 at the time. The new one is miles ahead of the old
> > one in efficiency according to the wife.
> > > Leroy Eckert
> > > 1990 WB-40 Smoke N Mirrors
> > > Dahlonega, GA
> > > Royale Conversion
> > >
> > > --- On Sun, 1/25/09, jburgessx2 wrote:
> > > From: jburgessx2
> >
> > > Subject: [WanderlodgeForum] Re: Convection/Microwave
> > > To:
WanderlodgeForum@yahoogroups.com
> > > Date: Sunday, January 25, 2009, 6:40 PM
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Jay,
> > >
> > >
> > >
> > > That's good to know. I know I had a Sharp in my Beaver and it was
> > a
> > >
> > > top notch microwave/convectio n oven and still runs strong today
> > after
> > >
> > > 20+ years.
> > >
> > >
> > >
> > > Jerry
> > >
> > > 1985 PT 40
> > >
> > >
> > >
> > > --- In WanderlodgeForum@ yahoogroups. com, "Jay Darst"
> >
> > >
> > > wrote:
> > >
> > > >
> > >
> > > > I replaced my Sharp with a Dacor DCM24S.
> > >
> > > >
> > >
> > > > Fits nicely, needed a 1/2" shim(plywood with hardwood trim pc to
> > >
> > > look
> > >
> > > > like the rest of the Bird)
> > >
> > > >
> > >
> > > > Works great. Dam near all convection/microwav es are made by
> > SHARP.
> > >
> > > So
> > >
> > > > don't blow a bunch of money on DACOR or VIKING, they are made by
> > >
> > > > SHARP.
> > >
> > > >
> > >
> > > > Of course I didn't learn that until I had bought the DACOR($850)
> > >
> > > for
> > >
> > > > the Bird and VIKING($1,500) for the house. They are the same
> > except
> > >
> > > > the hood ornament.... Daaa..... Live and learn
> > >
> > > >
> > >
> > > > Jay Darst
> > >
> > > > 85PT40
> > >
> > > > 91Prevost Royale 40XL for sale
> > >
> > > > Sullivan, IL
> > >
> > > >
> > >
> > > > --- In WanderlodgeForum@ yahoogroups. com, "jburgessx2"
> > >
> > > > wrote:
> > >
> > > > >
> > >
> > > > > Ralph,
> > >
> > > > >
> > >
> > > > > Thanks a bunch. I really like this old Bird and I want to get
> > it
> > >
> > > > > back into shape. We full time and can't live without the
> > oven.
> > >
> > > I
> > >
> > > > > appreciate your help!
> > >
> > > > >
> > >
> > > > > Jerry
> > >
> > > > > 1985 PT40
> > >
> > > > >
> > >
> > > > > --- In WanderlodgeForum@ yahoogroups. com, "Ralph L.
> > Fullenwider"
> > >
> > > > > wrote:
> > >
> > > > > >
> > >
> > > > > > Hi Jerry and congrats on your Bird.
> > >
> > > > > >
> > >
> > > > > > Check out the Sharp 930 convection/microwav e it is 18.8
> > deep,
> > >
> > > > 14.9
> > >
> > > > > high and
> > >
> > > > > > 25 wide and fits like a glove, and a good unit.
> > >
> > > > > >
> > >
> > > > > > Safe travels,
> > >
> > > > > >
> > >
> > > > > > Ralph and Charolette Fullenwider
> > >
> > > > > > 84FC35 "Ruff Diamond"
> > >
> > > > > > Duncan, Oklahoma
> > >
> > > > > >
> > >
> > > > > > At 04:13 PM 1/25/2009 +0000, you wrote:
> > >
> > > > > > >I've just purchased my first Bird and am looking for some
> > >
> > > help.
> > >
> > > > > The
> > >
> > > > > > >original microwave/convectio n oven was broken so the
> > previous
> > >
> > > > owner
> > >
> > > > > > >installed just a microwave in it's place. I would like to
> > >
> > > have
> > >
> > > > the
> > >
> > > > > > >convection portion back because there isn't any other oven
> > >
> > > > > installed.
> > >
> > > > > > >I like my baked goods and the wife want's her oven back!
> > >
> > > > > > >
> > >
> > > > > > >Has anyone else had this problem? What model/brand
> > >
> > > > > > >microwave/convecti on oven will fit in the original hole on
> > a
> > >
> > > 1985
> > >
> > > > > > >PT40? Any help would be greatly appreciated.
> > >
> > > > > > >
> > >
> > > > > > >If no one knows, I can always do the measurements and search
> > >
> > > > > myself.
> > >
> > > > > > >But, I thought someone may have already been down this road.
> > >
> > > > > > >
> > >
> > > > > > >Thanks. Jerry
> > >
> > > > > > >1985 PT40
> > >
> > > > > > >
> > >
> > > > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > >
> > >
> >
> >
> >
>

Ralph,

I did buy the Sharp you recommended and it does fit quite nicely.
And, it looks good with the black color. I thought about the
stainless but it was about $80 more and someone posted and said not
much showed anyways (they were right).

Thanks again for the suggestion. You certainly saved me a bunch of
time and effort searching for something that fit near perfect.

Jerry
85 PT40

--- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider"
wrote:
>
> Hi Jerry and congrats on your Bird.
>
> Check out the Sharp 930 convection/microwave it is 18.8 deep, 14.9
high and
> 25 wide and fits like a glove, and a good unit.
>
> Safe travels,
>
> Ralph and Charolette Fullenwider
> 84FC35 "Ruff Diamond"
> Duncan, Oklahoma
>
> At 04:13 PM 1/25/2009 +0000, you wrote:
> >I've just purchased my first Bird and am looking for some help.
The
> >original microwave/convection oven was broken so the previous owner
> >installed just a microwave in it's place. I would like to have the
> >convection portion back because there isn't any other oven
installed.
> >I like my baked goods and the wife want's her oven back!
> >
> >Has anyone else had this problem? What model/brand
> >microwave/convection oven will fit in the original hole on a 1985
> >PT40? Any help would be greatly appreciated.
> >
> >If no one knows, I can always do the measurements and search
myself.
> >But, I thought someone may have already been down this road.
> >
> >Thanks. Jerry
> >1985 PT40
> >
> >
>

Does any of the big box stores stock this Microwave???

Most seem to be a special order and shipping

Bill 88 FC Michigan

--- In WanderlodgeForum@yahoogroups.com, "jburgessx2"
wrote:
>
> Ralph,
>
> I did buy the Sharp you recommended and it does fit quite nicely.
> And, it looks good with the black color. I thought about the
> stainless but it was about $80 more and someone posted and said not
> much showed anyways (they were right).
>
> Thanks again for the suggestion. You certainly saved me a bunch of
> time and effort searching for something that fit near perfect.
>
> Jerry
> 85 PT40
>
> --- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider"
> wrote:
> >
> > Hi Jerry and congrats on your Bird.
> >
> > Check out the Sharp 930 convection/microwave it is 18.8 deep,
14.9
> high and
> > 25 wide and fits like a glove, and a good unit.
> >
> > Safe travels,
> >
> > Ralph and Charolette Fullenwider
> > 84FC35 "Ruff Diamond"
> > Duncan, Oklahoma
> >
> > At 04:13 PM 1/25/2009 +0000, you wrote:
> > >I've just purchased my first Bird and am looking for some help.
> The
> > >original microwave/convection oven was broken so the previous
owner
> > >installed just a microwave in it's place. I would like to have
the
> > >convection portion back because there isn't any other oven
> installed.
> > >I like my baked goods and the wife want's her oven back!
> > >
> > >Has anyone else had this problem? What model/brand
> > >microwave/convection oven will fit in the original hole on a 1985
> > >PT40? Any help would be greatly appreciated.
> > >
> > >If no one knows, I can always do the measurements and search
> myself.
> > >But, I thought someone may have already been down this road.
> > >
> > >Thanks. Jerry
> > >1985 PT40
> > >
> > >
> >
>

Bill,

I couldn't find it locally at any of the stores. I ended up ordering
it online at a place called Etronics. I think I paid about $411
which included shipping.

It does fit nicely in the existing space.

Jerry
85 PT40

--- In WanderlodgeForum@yahoogroups.com, "pattypape"
wrote:
>
>
> Does any of the big box stores stock this Microwave???
>
> Most seem to be a special order and shipping
>
> Bill 88 FC Michigan
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "jburgessx2"
> wrote:
> >
> > Ralph,
> >
> > I did buy the Sharp you recommended and it does fit quite
nicely.
> > And, it looks good with the black color. I thought about the
> > stainless but it was about $80 more and someone posted and said
not
> > much showed anyways (they were right).
> >
> > Thanks again for the suggestion. You certainly saved me a bunch
of
> > time and effort searching for something that fit near perfect.
> >
> > Jerry
> > 85 PT40
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider"
> > wrote:
> > >
> > > Hi Jerry and congrats on your Bird.
> > >
> > > Check out the Sharp 930 convection/microwave it is 18.8 deep,
> 14.9
> > high and
> > > 25 wide and fits like a glove, and a good unit.
> > >
> > > Safe travels,
> > >
> > > Ralph and Charolette Fullenwider
> > > 84FC35 "Ruff Diamond"
> > > Duncan, Oklahoma
> > >
> > > At 04:13 PM 1/25/2009 +0000, you wrote:
> > > >I've just purchased my first Bird and am looking for some
help.
> > The
> > > >original microwave/convection oven was broken so the previous
> owner
> > > >installed just a microwave in it's place. I would like to
have
> the
> > > >convection portion back because there isn't any other oven
> > installed.
> > > >I like my baked goods and the wife want's her oven back!
> > > >
> > > >Has anyone else had this problem? What model/brand
> > > >microwave/convection oven will fit in the original hole on a
1985
> > > >PT40? Any help would be greatly appreciated.
> > > >
> > > >If no one knows, I can always do the measurements and search
> > myself.
> > > >But, I thought someone may have already been down this road.
> > > >
> > > >Thanks. Jerry
> > > >1985 PT40
> > > >
> > > >
> > >
> >
>

Jerry, am glad it worked out for you. I have seen that unit installed and
it does look good. The actual ground work was done by a member of this
Forum, Mike McMahan in Waco, Tx and I just passed the findings on to you.

Safe travels,

Ralph and Charolette Fullenwider
84FC35 "Ruff Diamond"
Duncan, Oklahoma

At 12:18 AM 2/7/2009 +0000, you wrote:
>Ralph,
>
>I did buy the Sharp you recommended and it does fit quite nicely.
>And, it looks good with the black color. I thought about the
>stainless but it was about $80 more and someone posted and said not
>much showed anyways (they were right).
>
>Thanks again for the suggestion. You certainly saved me a bunch of
>time and effort searching for something that fit near perfect.
>
>Jerry
>85 PT40
>
>--- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider"
> wrote:
> >
> > Hi Jerry and congrats on your Bird.
> >
> > Check out the Sharp 930 convection/microwave it is 18.8 deep, 14.9
>high and
> > 25 wide and fits like a glove, and a good unit.
> >
> > Safe travels,
> >
> > Ralph and Charolette Fullenwider
> > 84FC35 "Ruff Diamond"
> > Duncan, Oklahoma
> >
> > At 04:13 PM 1/25/2009 +0000, you wrote:
> > >I've just purchased my first Bird and am looking for some help.
>The
> > >original microwave/convection oven was broken so the previous owner
> > >installed just a microwave in it's place. I would like to have the
> > >convection portion back because there isn't any other oven
>installed.
> > >I like my baked goods and the wife want's her oven back!
> > >
> > >Has anyone else had this problem? What model/brand
> > >microwave/convection oven will fit in the original hole on a 1985
> > >PT40? Any help would be greatly appreciated.
> > >
> > >If no one knows, I can always do the measurements and search
>myself.
> > >But, I thought someone may have already been down this road.
> > >
> > >Thanks. Jerry
> > >1985 PT40
> > >
> > >
> >
>

Bill:

I checked with Home Depot, Lowes, Best Buy and Sears. None have it in
stock but a few said they could order. I have a feeling that the units
are no longer being mfrd. and that is why it is available only online.
I too found that Etronic price. I will be ordering one very soon.

Bruce

1988 FC35

Pages: 1 2

Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Dorn Hetzel

ronmarabito2002

jburgessx2

pattypape

jburgessx2

Ralph L. Fullenwider

birdshill123