Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Stainless Steel light Covers 91-97 available december 11 just in time
for Christmas
From a Canadian Company but fabricated in the US
dupreeproducts.com


Stephen 77fc35

Steve, the stainless inserts wont fit true unless there is a bow from
headlight to headlight. It looks like a poor attempt at a mod. The
ends wing out past headlight lines. may be a good idea to look at how
one fits befor you buy too many. I made several of them for members
with rem stainless. you can make the bow by folding lips 2 inch wider
then trim off the excess with a plasma torch. Lift the torch and add
extra heat mid cut. leaves some slag that requires extra work to
clean.

Bright stainless was too much for my bus colors. I'm thinking it
would be cool to have it brightstainless if there was a chrome bumper
but I stuck with a buff finish stainless insert because it was less
flashy and more complementary. I picked up the stainless rem sheets
for less than $20. and made 12 units before I got the curv looking
good. I notice that the buff finish must have some issues because
there is a slight rusty residu after 2 years (easy to wash off) but
the bright stuff sitting outside has no rust. could be they buff it
up with some steel or the buff material is inferior to my bright
rems.
How much are your inserts???

GregoryO'Connor
ofTim&Greg
94ptRomoland
--- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
wrote:
>
> Stainless Steel light Covers 91-97 available december 11 just in time
> for Christmas
> From a Canadian Company but fabricated in the US
> dupreeproducts.com
>
>
> Stephen 77fc35
>

Stephen,

Are this the cover that replaces the plastic cover between the two
headlights?

Eric Perplies
96' 42' WBWL


--- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
wrote:
>
> Stainless Steel light Covers 91-97 available december 11 just in time
> for Christmas
> From a Canadian Company but fabricated in the US
> dupreeproducts.com
>
>
> Stephen 77fc35
>

yes it does
Highly polished 18 gauge stainless steel
Stephen 77fc35




--- In WanderlodgeForum@yahoogroups.com, "Eric Perplies"
wrote:
>
> Stephen,
>
> Are this the cover that replaces the plastic cover between the two
> headlights?
>
> Eric Perplies
> 96' 42' WBWL
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
> wrote:
> >
> > Stainless Steel light Covers 91-97 available december 11 just in time
> > for Christmas
> > From a Canadian Company but fabricated in the US
> > dupreeproducts.com
> >
> >
> > Stephen 77fc35
> >
>

Wish I needed some. Any suggestions on polishing or replacing the clear plastic headlight covers on the LXi? I thought about having a couple pieces of tempered glass stuck in there.

Brad Barton 00LXiDFW bbartonwx@...

---

To: WanderlodgeForum@yahoogroups.com
From: cape0001@...
Date: Sun, 7 Dec 2008 03:22:31 +0000
Subject: [WanderlodgeForum] Re: Stainless Steel Light Covers

----- Original Message -----

From: brad barton

Sent: Sunday, December 07, 2008 8:44 AM

To: wanderlodgeforum@yahoogroups.com

Subject: RE: [WanderlodgeForum] Re: Stainless Steel Light Covers

Wish I needed some. Any suggestions on polishing or replacing the clear plastic headlight covers on the LXi? I thought about having a couple pieces of tempered glass stuck in there.

Brad Barton 00LXiDFW bbartonwx@hotmail.com

---

To: WanderlodgeForum@yahoogroups.com
From: cape0001@hotmail.com
Date: Sun, 7 Dec 2008 03:22:31 +0000
Subject: [WanderlodgeForum] Re: Stainless Steel Light Covers

yes it does
Highly polished 18 gauge stainless steel
Stephen 77fc35

--- In "WanderlodgeForum@yahoogroups.com", "Eric Perplies"
...> wrote:
>
> Stephen,
>
> Are this the cover that replaces the plastic cover between the two
> headlights?
>
> Eric Perplies
> 96' 42' WBWL
>
>
> --- In "WanderlodgeForum@yahoogroups.com", "Stephen Birtles"
> wrote:
> >
> > Stainless Steel light Covers 91-97 available december 11 just in time
> > for Christmas
> > From a Canadian Company but fabricated in the US
> > dupreeproducts.com
> >
> >
> > Stephen 77fc35
> >
>

---

Send e-mail anywhere. No map, no compass. Get your Hotmail® account now.

Thanks Al. I will.

Brad Barton 00LXiDFW bbartonwx@...

---

To: WanderlodgeForum@yahoogroups.com
From: al_scudder@...
Date: Mon, 8 Dec 2008 15:32:22 -0500
Subject: Re: [WanderlodgeForum] Re: Stainless Steel Light Covers

Brad,



I took mine off many thousands of miles ago. I also swapped

out the stock high and low beams for 90mm Xenin HID's. One

of my future projects is to take my lexan covers, drill two 90mm

holes in them, bring the XID headlights out 1.5 inches, paint

the back side of the lexan black and reinstall. (wish I had a

pic). This will give the effect of bug eye headlamps jutting

out from a smooth bumper.



David Brady

'02 LXi, NC



brad barton wrote:

Thanks Al. I will.



Brad Barton 00LXiDFW bbartonwx@hotmail.com

---

To: WanderlodgeForum@yahoogroups.com

From: al_scudder@msn.com

Date: Mon, 8 Dec 2008 15:32:22 -0500

Subject: Re: [WanderlodgeForum] Re: Stainless Steel Light Covers

Go to any auto store and see MOTHERS or MCQUIRES products one of
themhas just come out with a new product for restorations on cars. I
have seen the demo and it works great on headlight covers

Scooter

2000LX

Ocqueoc, MI

-----
Original Message -----

From:
brad barton

Sent:
Sunday, December 07, 2008 8:44 AM

To:
wanderlodgeforum@yahoogroups.com

Subject:
RE: [WanderlodgeForum] Re: Stainless Steel Light Covers

Wish I needed some. Any suggestions on polishing or replacing
the clear plastic headlight covers on the LXi? I thought about having
a couple pieces of tempered glass stuck in there.



Brad Barton 00LXiDFW bbartonwx@hotmail.com

---

To: WanderlodgeForum@yahoogroups.com

From: cape0001@hotmail.com

Date: Sun, 7 Dec 2008 03:22:31 +0000

Subject: [WanderlodgeForum] Re: Stainless Steel Light Covers

yes it does

Highly polished 18 gauge stainless steel

Stephen 77fc35



--- In "WanderlodgeForum@yahoogroups.com",
"Eric Perplies"

...> wrote:

>

> Stephen,

>

> Are this the cover that replaces the plastic cover between the two

> headlights?

>

> Eric Perplies

> 96' 42' WBWL

>

>

> --- In "WanderlodgeForum@yahoogroups.com",
"Stephen Birtles"

> wrote:

> >

> > Stainless Steel light Covers 91-97 available december 11 just
in time

> > for Christmas

> > From a Canadian Company but fabricated in the US

> > dupreeproducts.com

> >

> >

> > Stephen 77fc35

> >

>

---

Send e-mail anywhere. No map, no compass. Get
your Hotmail® account now.

---

Send e-mail faster without improving your typing skills. Get your Hotmail® account.

No virus found in this incoming message.

Checked by AVG. Version: 7.5.552 / Virus Database: 270.9.15/1835 - Release Date: 12/7/2008 4:56 PM

David,

You obviously have too much time on your hands. I'm fine with flush headlights behind covers, but I hate the hazy scratches. I've redone corian and can probably redo the covers if I have the right stuff. We're currently considering a trip to Destin/Fort Walton Beach this January. Once I got there, I'd probably have blowing sand.

Brad

Brad Barton 00LXiDFW bbartonwx@...

---

To: WanderlodgeForum@yahoogroups.com
From: dmb993@...
Date: Mon, 8 Dec 2008 19:58:41 -0500
Subject: Re: [WanderlodgeForum] Re: Stainless Steel Light Covers

crest toothpaste works good also it is a polishing compound
stephen 7735fc


--- In WanderlodgeForum@yahoogroups.com, "Al Scudder"
wrote:
>
> Go to any auto store and see MOTHERS or MCQUIRES products one of
them has just come out with a new product for restorations on cars. I
have seen the demo and it works great on headlight covers
>
> Scooter
> 2000LX
> Ocqueoc, MI
>
> ----- Original Message -----
> From: brad barton
> Sent: Sunday, December 07, 2008 8:44 AM
> To: wanderlodgeforum@yahoogroups.com
> Subject: RE: [WanderlodgeForum] Re: Stainless Steel Light Covers
>
> Wish I needed some. Any suggestions on polishing or replacing the
clear plastic headlight covers on the LXi? I thought about having a
couple pieces of tempered glass stuck in there.
>
> Brad Barton 00LXiDFW bbartonwx@...
>
>
>
>
>
>
> To: WanderlodgeForum@yahoogroups.com
> From: cape0001@...
> Date: Sun, 7 Dec 2008 03:22:31 +0000
> Subject: [WanderlodgeForum] Re: Stainless Steel Light Covers
>
>
> yes it does
> Highly polished 18 gauge stainless steel
> Stephen 77fc35
>
> --- In WanderlodgeForum@yahoogroups.com, "Eric Perplies"
> wrote:
> >
> > Stephen,
> >
> > Are this the cover that replaces the plastic cover between the two
> > headlights?
> >
> > Eric Perplies
> > 96' 42' WBWL
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
> > wrote:
> > >
> > > Stainless Steel light Covers 91-97 available december 11 just in
time
> > > for Christmas
> > > From a Canadian Company but fabricated in the US
> > > dupreeproducts.com
> > >
> > >
> > > Stephen 77fc35
> > >
> >
>
>
>
>
>
>
> Send e-mail anywhere. No map, no compass. Get your Hotmail® account now
>