Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Full Version: Throttle cable
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2

Stephen Birtles

The original cable was produced by morse for bendix they still have
the prints for this cable Morse and Bendix
MORSE WILL NOT BUILD YOU ONE
I have tried unless it is a large quantity (Hundreds) the will not
entertain the idea
IF you can find an industrial shop that can do it much luck if you
find one


I have tried some of the best and they say sorry

Stephen 77 fc35
dupreeproducts.com



--- In WanderlodgeForum@yahoogroups.com, Truckinl wrote:
>
> Rick Brink (87 FC) had Mike Holnstien (414 303 7079) rebuild his
> throttle cable.
> D.Thompson (89 FC)
> Cameron WI
>

Harold Prescott

The company I used is located in Denver,
'Instrument Sales and Service'
phone number 800 548 1185

Harold Prescott
'85 FC35



--- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
wrote:
>
> The original cable was produced by morse for bendix they still have
> the prints for this cable Morse and Bendix
> MORSE WILL NOT BUILD YOU ONE
> I have tried unless it is a large quantity (Hundreds) the will not
> entertain the idea
> IF you can find an industrial shop that can do it much luck if you
> find one
>
>
> I have tried some of the best and they say sorry
>
> Stephen 77 fc35
> dupreeproducts.com
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, Truckinl wrote:
> >
> > Rick Brink (87 FC) had Mike Holnstien (414 303 7079) rebuild his
> > throttle cable.
> > D.Thompson (89 FC)
> > Cameron WI
> >
>

George or Betsy Bush

We had a throttle cable made at the place in Denver. They did it while we waited. Sure lucky we had a swing radiator, as it isn't easy to get in place. Would be happy to share our experience, as we learned some lessons in the process. Think it was a little over $100.
George Bush '83fc
on the road in Maine
cell: 804-512-8130

raypander

--- In WanderlodgeForum@yahoogroups.com, "Harold Prescott"
wrote:
>
> The company I used is located in Denver,
> 'Instrument Sales and Service'
> phone number 800 548 1185
>
> Harold Prescott
> '85 FC35
>


>
>
> --- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
> wrote:
> >
> > The original cable was produced by morse for bendix they still
have
> > the prints for this cable Morse and Bendix
> > MORSE WILL NOT BUILD YOU ONE
> > I have tried unless it is a large quantity (Hundreds) the will not
> > entertain the idea
> > IF you can find an industrial shop that can do it much luck if you
> > find one
> >
> >
> > I have tried some of the best and they say sorry
> >
> > Stephen 77 fc35
> > dupreeproducts.com
> >
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com, Truckinl wrote:
> > >
> > > Rick Brink (87 FC) had Mike Holnstien (414 303 7079) rebuild
his
> > > throttle cable.
> > > D.Thompson (89 FC)
> > > Cameron WI
> > >
> > Thanks to all who responded to my post regarding my throttle
cable. I talked to Mike Holnstien and got some good input.
Today I talked to Instrument Sales and Service and I'm hopeful
that they can build a new cable after I send them my old one.
I'll let you know the outcome.

Thanks again,
Ray Pander
1988 35' FC
>

roncan1842@...



I replaced my throttle cable with direct mechanical linkage on my 82-35 FC much better response in fact it improved fuel flow. If you are interested I can e-mail pictures of the linkage, as I a now have the dog house removed.
Ron Roberts Lovinit 82-35 FC
In a message dated 10/23/2008 9:07:39 A.M. Eastern Daylight Time, bgaramella@... writes:



--- In "WanderlodgeForum%40yahoogroups.com", "Bill Garamella" <bgaramella@<WBR>...> wrote:

One more thought, I had know from the start this fix was going to coast me hundreds of
dollars, I would have opted for a new Air throttle with a new cruise control. In the end I
think may have been better off.

However, your FC is newer and may have a different set up.




Gardner Yeaw

Ron,
I would be interested in pictures. So far mine is OK, but an on the
road failure would be a nightmare. It would be god to have a
workaround plan. Can you post thm to the forum?

Gardner Yeaw
83FC35

--- In WanderlodgeForum@yahoogroups.com, roncan1842@... wrote:
>
> I replaced my throttle cable with direct mechanical linkage on my
82-35 FC
> much better response in fact it improved fuel flow. If you are
interested I
> can e-mail pictures of the linkage, as I a now have the dog house
removed.
> Ron Roberts Lovinit 82-35 FC
>
>
> In a message dated 10/23/2008 9:07:39 A.M. Eastern Daylight Time,
> bgaramella@... writes:
>
>
>
>
> --- In _WanderlodgeForum@WanderlodgeFWan_
> (mailto:WanderlodgeForum@yahoogroups.com) , "Bill Garamella"
<bgaramella@bga> wrote:
>
> One more thought, I had know from the start this fix was going to
coast me
> hundreds of
> dollars, I would have opted for a new Air throttle with a new
cruise
> control. In the end I
> think may have been better off.
>
> However, your FC is newer and may have a different set up.
>
>
>
>
> **************A Good Credit Score is 700 or Above. See yours in
just 2 easy
> steps!
> (http://pr.atwola.com/promoclk/100000075x...15650/aol?
redir=http://www.freecreditreport.com/pm/default.aspx?
sc=668072&hmpgID=82&bcd=emailf
> ooter)
>
Pages: 1 2
Reference URL's