04-28-2008, 03:21
erniecarpet@...
04-28-2008, 05:38
Rick Archie took his apart and it takes a 1/2 inch allen wrench. He stated they have O-rings in there and can be rebuilt.
Ernie Ekberg
83PT40
Livingston, Montana
83PT40
Livingston, Montana
needing to follow Rick's advice and rebuild my front jack
Need a new ride? Check out the largest site for U.S. used car listings at AOL Autos.
Peggy & Ed McStay
04-28-2008, 06:14
--- In WanderlodgeForum@yahoogroups.com, "ejohna2000"
wrote:
>
> Anyone have a source for seals for the HWH jacks. Called HWH, they
will
> not sell parts, only complete assemblys.
>
john---- i had the same answer given to me by hwh and how they may
need to upgrade my cylinder and all that mess. they made me mad and i
took my jack to a hydraulic shop and they had the parts in stock to
fit. if i remember right the piston assy is 2.750". it has 2 wipers
and one ring for pressure. a real easy fix and you dont have to fool
with those jerks at hwh. if you need and other help just ask. it was
the rear jacks that i rebuilt..
ed mcstay
Lonesome dove
lake charles,louisiana
35ft rb
wrote:
>
> Anyone have a source for seals for the HWH jacks. Called HWH, they
will
> not sell parts, only complete assemblys.
>
john---- i had the same answer given to me by hwh and how they may
need to upgrade my cylinder and all that mess. they made me mad and i
took my jack to a hydraulic shop and they had the parts in stock to
fit. if i remember right the piston assy is 2.750". it has 2 wipers
and one ring for pressure. a real easy fix and you dont have to fool
with those jerks at hwh. if you need and other help just ask. it was
the rear jacks that i rebuilt..
ed mcstay
Lonesome dove
lake charles,louisiana
35ft rb
brad barton
04-28-2008, 06:16
You might try Mr. Olivers or Metro RV in the DFW area.
BradBarton00LXiDFW bbartonwx@...
Make i'm yours. Create a custom banner to support your cause.
BradBarton00LXiDFW bbartonwx@...
To: WanderlodgeForum@yahoogroups.com
From: emc2jb6@...
Date: Mon, 28 Apr 2008 18:14:08 +0000
Subject: [WanderlodgeForum] Re: Jacks
--- In "WanderlodgeForum@yahoogroups.com", "ejohna2000"
wrote:
>
> Anyone have a source for seals for the HWH jacks. Called HWH, they
will
> not sell parts, only complete assemblys.
>
john---- i had the same answer given to me by hwh and how they may
need to upgrade my cylinder and all that mess. they made me mad and i
took my jack to a hydraulic shop and they had the parts in stock to
fit. if i remember right the piston assy is 2.750". it has 2 wipers
and one ring for pressure. a real easy fix and you dont have to fool
with those jerks at hwh. if you need and other help just ask. it was
the rear jacks that i rebuilt..
ed mcstay
Lonesome dove
lake charles,louisiana
35ft rb
Make i'm yours. Create a custom banner to support your cause.