bubblerboy64
03-02-2008, 04:38
As long as the wheels turn out to be in good condition I should be Ok
with what I am going after. I talked to BB and the everything seems a
go. This fellow is closer so unless trouble develops I will going to
get them in a week or two. I will need longer studs but otherwise
should be a direct cross over. Thanks and if for some reason....I'll
be in touch.
John Heckman
central Pa
1973 FC.
>
> --- In WanderlodgeForum@yahoogroups.com, "bubblerboy64"
> wrote:
> >I have four firestone original oem 85 pt40 22.5X8.25 Lee
> Condosta85PT40 Holden Beach N.C
> > I've been lookin' for a while and I have a lead which might work
out.
> > Quick question. My ole 73 has the axles off a 1984 I believe. I
am
> > assuming that the wheels will fit. The alcoa's are off a BB bus.
> > Before I get into this too deep would the wheels on the pushers
be
> the
> > same as the FC's? I know I have not provided much information
but if
> > the wheels on the pushers don't fit the FC's then my hunt
continues.
> My
> > bus has 22.5 inch steel wheels. Ten bolt stud piloted but beyond
that
> I
> > will have to reseach. Thanks in advance.
> > John Heckman
> > central Pa
> > 1973 FC
> >
>
with what I am going after. I talked to BB and the everything seems a
go. This fellow is closer so unless trouble develops I will going to
get them in a week or two. I will need longer studs but otherwise
should be a direct cross over. Thanks and if for some reason....I'll
be in touch.
John Heckman
central Pa
1973 FC.
>
> --- In WanderlodgeForum@yahoogroups.com, "bubblerboy64"
> wrote:
> >I have four firestone original oem 85 pt40 22.5X8.25 Lee
> Condosta85PT40 Holden Beach N.C
> > I've been lookin' for a while and I have a lead which might work
out.
> > Quick question. My ole 73 has the axles off a 1984 I believe. I
am
> > assuming that the wheels will fit. The alcoa's are off a BB bus.
> > Before I get into this too deep would the wheels on the pushers
be
> the
> > same as the FC's? I know I have not provided much information
but if
> > the wheels on the pushers don't fit the FC's then my hunt
continues.
> My
> > bus has 22.5 inch steel wheels. Ten bolt stud piloted but beyond
that
> I
> > will have to reseach. Thanks in advance.
> > John Heckman
> > central Pa
> > 1973 FC
> >
>