My buddy is having trouble with his jacks working on his 92 WB. He has changed
out 2 relays(Is there a 3rd one he hasn't found?) Every thing checks as he has
been instructed by HWH but the pump will not come on. HWH says it should work
by receiving a ground when activated. He can make it(the pump) work by
providing a hot wire, not a ground. Any ideas?
Thanks LT 90 SP in Eclectic, AL.
[Non-text portions of this message have been removed]
Check the motor by applying power directly to the motor terminal. I
recently had a problem and it was a broken wire under the termianl to
the armature. Any generator/starter shop can repair it if it needs it.
Mine showed practically no wear inside. Will outlast me for sure.
R.E. (Ron Marabito, Dallas, TX 92WB40
Moderator
--- In
WanderlodgeForum@yahoogroups.com, "Lawrence Thornell"
wrote:
> My buddy is having trouble with his jacks working on his 92 WB. He
has changed out 2 relays(Is there a 3rd one he hasn't found?) Every
thing checks as he has been instructed by HWH but the pump will not
come on. HWH says it should work by receiving a ground when
activated. He can make it(the pump) work by providing a hot wire, not
a ground. Any ideas?
> Thanks LT 90 SP in Eclectic, AL.
>
>
> [Non-text portions of this message have been removed]
Ron
The pump will run when wired straight with a hot wire. HWH says + terminal
should remain hot, then ground is applied when activated, + is not
hot-ground is not applied.
Thanks Lt 90 SP in Eclectic, AL, a two Bird town, 1000 people, 2 Birds
----- Original Message -----
From: "ronmarabito2002"
To:
Sent: Thursday, May 19, 2005 9:43 AM
Subject: [WanderlodgeForum] Re: 92 WB Jacks
> Check the motor by applying power directly to the motor terminal. I
> recently had a problem and it was a broken wire under the termianl to
> the armature. Any generator/starter shop can repair it if it needs it.
> Mine showed practically no wear inside. Will outlast me for sure.
>
> R.E. (Ron Marabito, Dallas, TX 92WB40
> Moderator
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Lawrence Thornell"
> wrote:
>> My buddy is having trouble with his jacks working on his 92 WB. He
> has changed out 2 relays(Is there a 3rd one he hasn't found?) Every
> thing checks as he has been instructed by HWH but the pump will not
> come on. HWH says it should work by receiving a ground when
> activated. He can make it(the pump) work by providing a hot wire, not
> a ground. Any ideas?
>> Thanks LT 90 SP in Eclectic, AL.
>>
>>
>> [Non-text portions of this message have been removed]
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
If the motor runs, then it has to be one of the two solenoids. If
they were replaced, then check to see if they are wired correctly.
I believe the key has to be on for them to be energized. Maybe
not. I'm having a senior moment. Seems like when I replaced one of
my solenoids, it required the addition of a ground wire.
If none of this works, let me know. I'll go out to my coach and run
back through it.
R.E. (Ron) Marabito, Dallas, TX 92WB40
Moderator.
--- In
WanderlodgeForum@yahoogroups.com, "Lawrence Thornell"
wrote:
> Ron
> The pump will run when wired straight with a hot wire. HWH says +
terminal
> should remain hot, then ground is applied when activated, + is
not
> hot-ground is not applied.
> Thanks Lt 90 SP in Eclectic, AL, a two Bird town, 1000 people, 2
Birds
>
> ----- Original Message -----
> From: "ronmarabito2002"
> To:
> Sent: Thursday, May 19, 2005 9:43 AM
> Subject: [WanderlodgeForum] Re: 92 WB Jacks
>
>
> > Check the motor by applying power directly to the motor
terminal. I
> > recently had a problem and it was a broken wire under the
termianl to
> > the armature. Any generator/starter shop can repair it if it
needs it.
> > Mine showed practically no wear inside. Will outlast me for
sure.
> >
> > R.E. (Ron Marabito, Dallas, TX 92WB40
> > Moderator
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Lawrence Thornell"
> > wrote:
> >> My buddy is having trouble with his jacks working on his 92
WB. He
> > has changed out 2 relays(Is there a 3rd one he hasn't found?)
Every
> > thing checks as he has been instructed by HWH but the pump will
not
> > come on. HWH says it should work by receiving a ground when
> > activated. He can make it(the pump) work by providing a hot
wire, not
> > a ground. Any ideas?
> >> Thanks LT 90 SP in Eclectic, AL.
> >>
> >>
> >> [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
Thanks for the input Ron
He has decided to carry it to Ron in Knoxville for professional assistance.
LT
----- Original Message -----
From: "ronmarabito2002"
To:
Sent: Thursday, May 19, 2005 3:10 PM
Subject: [WanderlodgeForum] Re: 92 WB Jacks
> If the motor runs, then it has to be one of the two solenoids. If
> they were replaced, then check to see if they are wired correctly.
> I believe the key has to be on for them to be energized. Maybe
> not. I'm having a senior moment. Seems like when I replaced one of
> my solenoids, it required the addition of a ground wire.
>
> If none of this works, let me know. I'll go out to my coach and run
> back through it.
>
> R.E. (Ron) Marabito, Dallas, TX 92WB40
> Moderator.
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Lawrence Thornell"
> wrote:
>> Ron
>> The pump will run when wired straight with a hot wire. HWH says +
> terminal
>> should remain hot, then ground is applied when activated, + is
> not
>> hot-ground is not applied.
>> Thanks Lt 90 SP in Eclectic, AL, a two Bird town, 1000 people, 2
> Birds
>>
>> ----- Original Message -----
>> From: "ronmarabito2002"
>> To:
>> Sent: Thursday, May 19, 2005 9:43 AM
>> Subject: [WanderlodgeForum] Re: 92 WB Jacks
>>
>>
>> > Check the motor by applying power directly to the motor
> terminal. I
>> > recently had a problem and it was a broken wire under the
> termianl to
>> > the armature. Any generator/starter shop can repair it if it
> needs it.
>> > Mine showed practically no wear inside. Will outlast me for
> sure.
>> >
>> > R.E. (Ron Marabito, Dallas, TX 92WB40
>> > Moderator
>> >
>> >
>> > --- In WanderlodgeForum@yahoogroups.com, "Lawrence Thornell"
>> > wrote:
>> >> My buddy is having trouble with his jacks working on his 92
> WB. He
>> > has changed out 2 relays(Is there a 3rd one he hasn't found?)
> Every
>> > thing checks as he has been instructed by HWH but the pump will
> not
>> > come on. HWH says it should work by receiving a ground when
>> > activated. He can make it(the pump) work by providing a hot
> wire, not
>> > a ground. Any ideas?
>> >> Thanks LT 90 SP in Eclectic, AL.
>> >>
>> >>
>> >> [Non-text portions of this message have been removed]
>> >
>> >
>> >
>> >
>> >
>> >
>> > Yahoo! Groups Links
>> >
>> >
>> >
>> >
>> >
>> >
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>