Bob & Carol Howald`
05-18-2005, 13:36
I've just completed my over-view of my HT755. I dropped the pan and
checked the screen ( looked like new) . Installed a new temp. sensor
bulb. and cleaned everything up real good. (repainted the outside of
the pan). Installed a new gasket and filled with about 7Gallons of new
Amsoil Torque Drive Synthetic Transmission fluid. It's been about three
years since I filled with the Syn. fluid and I figured time was up and
it was time to flush the old and re-do with new. A fairly easy job, the
hardest part was getting the dip-stick tube out of the pan before pan
removal. I ended up using a 30 " pipe wrench to get it broke loose.
Total cost , less than $190.00. Bob 93pt40 Illinois
checked the screen ( looked like new) . Installed a new temp. sensor
bulb. and cleaned everything up real good. (repainted the outside of
the pan). Installed a new gasket and filled with about 7Gallons of new
Amsoil Torque Drive Synthetic Transmission fluid. It's been about three
years since I filled with the Syn. fluid and I figured time was up and
it was time to flush the old and re-do with new. A fairly easy job, the
hardest part was getting the dip-stick tube out of the pan before pan
removal. I ended up using a 30 " pipe wrench to get it broke loose.
Total cost , less than $190.00. Bob 93pt40 Illinois