Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Wanderlodge Gurus - The Member Funded Wanderlodge Forum > Yahoo Groups Archive > WanderlodgeForum > Genny Exhaust
Full Version: Genny Exhaust
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

Scott

05-13-2005, 09:38
Well the saga on the genny (Perkins/Kohler 12.5kw) on RUBY
continues..After repairing the genny (stator, slip ring,
brushes,regulator, end bell bearing etc) the next step, and hopefully
the final step is to replace the exhaust. It was leaking at the muffler
(not safe) and I am having a terrible time trying to find a new
muffler. Donaldson simply says they dont make it anymore, my NAPA guy
cant cross it, and BB parts ..well lets just say BB parts..two messages
and no return call..I must not be well enough known or I dont have a
new Lxi or what ever!! Does anyone know what muffler I should use and
where to purchase it?? Also, the old muffler and exhaust pipe
would "soot" after running in the same spot for a while..exhaust pipe
was 1.5" I want to go bigger maybe 1.75" or even 2.0" to let the
engine "breathe" better maybe the sooting will go away then..any
thoughts?? Thanks in advance for any input.
Scott
86FC35 "RUBY"
Murrells Inlet SC (very noisey here..350,000 harleys rolling in..bike
week..yuck)

randydupree

05-13-2005, 12:47
you need to take the old muffler to a napa or even a tractor supply place,and
just match it up! randydupree93wb
----- Original Message -----
From: Scott
To: WanderlodgeForum@yahoogroups.com
Sent: Friday, May 13, 2005 5:38 PM
Subject: [WanderlodgeForum] Genny Exhaust


Well the saga on the genny (Perkins/Kohler 12.5kw) on RUBY
continues..After repairing the genny (stator, slip ring,
brushes,regulator, end bell bearing etc) the next step, and hopefully
the final step is to replace the exhaust. It was leaking at the muffler
(not safe) and I am having a terrible time trying to find a new
muffler. Donaldson simply says they dont make it anymore, my NAPA guy
cant cross it, and BB parts ..well lets just say BB parts..two messages
and no return call..I must not be well enough known or I dont have a
new Lxi or what ever!! Does anyone know what muffler I should use and
where to purchase it?? Also, the old muffler and exhaust pipe
would "soot" after running in the same spot for a while..exhaust pipe
was 1.5" I want to go bigger maybe 1.75" or even 2.0" to let the
engine "breathe" better maybe the sooting will go away then..any
thoughts?? Thanks in advance for any input.
Scott
86FC35 "RUBY"
Murrells Inlet SC (very noisey here..350,000 harleys rolling in..bike
week..yuck)




------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]

Jack & Donna Smith

05-13-2005, 13:34
Randy:
Would a Muffler shop (Not A Midas type) be of help? When we
replaced the 6.5 Onan with the present 5.5 Onan, the muffler now has a
sharp "Bark" How do you get the genny to purr quietly?
Jack Smith
1973FC31
SoCal

--- In WanderlodgeForum@yahoogroups.com, randydupree wrote:
> you need to take the old muffler to a napa or even a tractor supply
place,and just match it up! randydupree93wb
> ----- Original Message -----
> From: Scott
> To: WanderlodgeForum@yahoogroups.com
> Sent: Friday, May 13, 2005 5:38 PM
> Subject: [WanderlodgeForum] Genny Exhaust
>
>
> Well the saga on the genny (Perkins/Kohler 12.5kw) on RUBY
> continues..After repairing the genny (stator, slip ring,
> brushes,regulator, end bell bearing etc) the next step, and hopefully
> the final step is to replace the exhaust. It was leaking at the
muffler
> (not safe) and I am having a terrible time trying to find a new
> muffler. Donaldson simply says they dont make it anymore, my NAPA guy
> cant cross it, and BB parts ..well lets just say BB parts..two
messages
> and no return call..I must not be well enough known or I dont have a
> new Lxi or what ever!! Does anyone know what muffler I should use and
> where to purchase it?? Also, the old muffler and exhaust pipe
> would "soot" after running in the same spot for a while..exhaust pipe
> was 1.5" I want to go bigger maybe 1.75" or even 2.0" to let the
> engine "breathe" better maybe the sooting will go away then..any
> thoughts?? Thanks in advance for any input.
> Scott
> 86FC35 "RUBY"
> Murrells Inlet SC (very noisey here..350,000 harleys rolling in..bike
> week..yuck)
>
>
>
>
>
------------------------------------------------------------------------------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/WanderlodgeForum/
>
> b.. To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]

randydupree

05-13-2005, 13:43
a muffler shop may be able to help. i've seen on some older bbs where somebody
put 2 mufflers in line,i guess to quiet it down.just need to be careful not to
get too much backpressure.randydupree93wb
----- Original Message -----
From: Jack & Donna Smith
To: WanderlodgeForum@yahoogroups.com
Sent: Friday, May 13, 2005 9:34 PM
Subject: [WanderlodgeForum] Re: Genny Exhaust


Randy:
Would a Muffler shop (Not A Midas type) be of help? When we
replaced the 6.5 Onan with the present 5.5 Onan, the muffler now has a
sharp "Bark" How do you get the genny to purr quietly?
Jack Smith
1973FC31
SoCal

--- In WanderlodgeForum@yahoogroups.com, randydupree wrote:
> you need to take the old muffler to a napa or even a tractor supply
place,and just match it up! randydupree93wb
> ----- Original Message -----
> From: Scott
> To: WanderlodgeForum@yahoogroups.com
> Sent: Friday, May 13, 2005 5:38 PM
> Subject: [WanderlodgeForum] Genny Exhaust
>
>
> Well the saga on the genny (Perkins/Kohler 12.5kw) on RUBY
> continues..After repairing the genny (stator, slip ring,
> brushes,regulator, end bell bearing etc) the next step, and hopefully
> the final step is to replace the exhaust. It was leaking at the
muffler
> (not safe) and I am having a terrible time trying to find a new
> muffler. Donaldson simply says they dont make it anymore, my NAPA guy
> cant cross it, and BB parts ..well lets just say BB parts..two
messages
> and no return call..I must not be well enough known or I dont have a
> new Lxi or what ever!! Does anyone know what muffler I should use and
> where to purchase it?? Also, the old muffler and exhaust pipe
> would "soot" after running in the same spot for a while..exhaust pipe
> was 1.5" I want to go bigger maybe 1.75" or even 2.0" to let the
> engine "breathe" better maybe the sooting will go away then..any
> thoughts?? Thanks in advance for any input.
> Scott
> 86FC35 "RUBY"
> Murrells Inlet SC (very noisey here..350,000 harleys rolling in..bike
> week..yuck)
>
>
>
>
>
------------------------------------------------------------------------------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/WanderlodgeForum/
>
> b.. To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]




------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]

Tom Warner

05-13-2005, 15:27
Scott check this site if you already have an old muffler. If not I can
measure mine tomorrow.
http://www.unitedmuffler.com/round_truck_mufflers.html

Tom1982 FC35
Vernon Center,NY

At 09:38 PM 5/13/2005 +0000, you wrote:
>Well the saga on the genny (Perkins/Kohler 12.5kw) on RUBY
>continues..After repairing the genny (stator, slip ring,
>brushes,regulator, end bell bearing etc) the next step, and hopefully
>the final step is to replace the exhaust. It was leaking at the muffler
>(not safe) and I am having a terrible time trying to find a new
>muffler. Donaldson simply says they dont make it anymore, my NAPA guy
>cant cross it, and BB parts ..well lets just say BB parts..two messages
>and no return call..I must not be well enough known or I dont have a
>new Lxi or what ever!! Does anyone know what muffler I should use and
>where to purchase it?? Also, the old muffler and exhaust pipe
>would "soot" after running in the same spot for a while..exhaust pipe
>was 1.5" I want to go bigger maybe 1.75" or even 2.0" to let the
>engine "breathe" better maybe the sooting will go away then..any
>thoughts?? Thanks in advance for any input.
>Scott
>86FC35 "RUBY"
>Murrells Inlet SC (very noisey here..350,000 harleys rolling in..bike
>week..yuck)
>
>
>
>
>----------
>Yahoo! Groups Links
> * To visit your group on the web, go to:
> *
>
<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/group/W\
anderlodgeForum/
>
> *
> * To unsubscribe from this group, send an email to:
> *
>
Wanderl\
odgeForum-unsubscribe@yahoogroups.com
>
> *
> * Your use of Yahoo! Groups is subject to the
> <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
Wanderlodge Gurus - The Member Funded Wanderlodge Forum > Yahoo Groups Archive > WanderlodgeForum > Genny Exhaust
Reference URL's