Hello fellow Wanderlodgers,
Can anyone recommend a good machine shop in the Seattle/Tacoma area?
We're far from home (New Jersey) and getting some bad bearing noises
from our clutch fan assembly. We have the bearings for it but don't
know where to go...
Any help would be greatly appreciated.
Thanks!
Andy Coleman
83 FC35 Spring Lake, NJ
Andy:
Welcome to the Northwest but sorry you are having trouble. I can't
recomment a machine shop but there is a place that a number of Blue
Bird owners use. Martin is a good guy and will treat you right.
M & M Truck Maintenance
3421 Chapel Street S
Lakewood WA 98499
Toll Free: 866-504-8990
24 hr pager: 800-745-6113
Phone: 253-588-8990
He does a lot of work on the Birds for the Air Force and the Army.
He is located just off I-5 at Hwy 512. If you decide to check them
out give them a call and ask them for directions. I could get you
there but I would imagine they have easier directions than mine would
be.
I hope this helps.
Marv Wheeler
2004 M380
Ocean Shores, WA
--- In
WanderlodgeForum@yahoogroups.com, "Andy Coleman"
wrote:
>
> Hello fellow Wanderlodgers,
>
> Can anyone recommend a good machine shop in the Seattle/Tacoma
area?
> We're far from home (New Jersey) and getting some bad bearing
noises
> from our clutch fan assembly. We have the bearings for it but
don't
> know where to go...
>
> Any help would be greatly appreciated.
>
> Thanks!
>
> Andy Coleman
> 83 FC35 Spring Lake, NJ
>
Do they do windshield replacements?
On 12/08/07, Jon wrote:
>
> --- In WanderlodgeForum@yahoogroups.com,
> "Marv & Jean"
> wrote:
> >
> > Andy:
> >
> > Welcome to the Northwest but sorry you are having trouble. I can't
> > recomment a machine shop but there is a place that a number of Blue
> > Bird owners use. Martin is a good guy and will treat you right.
> >
> > M & M Truck Maintenance
> > 3421 Chapel Street S
> > Lakewood WA 98499
> >
> > Toll Free: 866-504-8990
> > 24 hr pager: 800-745-6113
> > Phone: 253-588-8990
> >
> > He does a lot of work on the Birds for the Air Force and the Army.
> > He is located just off I-5 at Hwy 512. If you decide to check them
> > out give them a call and ask them for directions. I could get you
> > there but I would imagine they have easier directions than mine
> would
> > be.
> >
> > I hope this helps.
> >
> > Marv Wheeler
> > 2004 M380
> > Ocean Shores, WA
> >
> > --- In WanderlodgeForum@yahoogroups.com,
> "Andy Coleman"
> > wrote:
> > >
> > > Hello fellow Wanderlodgers,
> > >
> > > Can anyone recommend a good machine shop in the Seattle/Tacoma
> > area?
> > > We're far from home (New Jersey) and getting some bad bearing
> > noises
> > > from our clutch fan assembly. We have the bearings for it but
> > don't
> > > know where to go...
> > >
> > > Any help would be greatly appreciated.
> > >
> > > Thanks!
> > >
> > > Andy Coleman
> > > 83 FC35 Spring Lake, NJ
>
> Andy I agree with Marv that this is a great shop to deal with.
>
> Jon
> Rebel Bird
> > >
> >
>
>
>
--
Rob, Sue & Merlin Robinson
94 WLWB
[Non-text portions of this message have been removed]
Thank you Marv -
I'm going to contact Martin first thing in the morning.
I'm staying in the KOA Campground outside Seattle for a few days.
Hoping to pull off the fan & clutch and bring it to Martin (or
somebody he recommends) to fix while we tour Seattle for the first
time.
Boy is this Wanderlodge Forum a great resource! Thank you everyone
who responded!
Andy
83 FC-35
Spring Lake, NJ
--- In
WanderlodgeForum@yahoogroups.com, "Marv & Jean"
wrote:
>
> Andy:
>
> Welcome to the Northwest but sorry you are having trouble. I
can't
> recomment a machine shop but there is a place that a number of
Blue
> Bird owners use. Martin is a good guy and will treat you right.
>
> M & M Truck Maintenance
> 3421 Chapel Street S
> Lakewood WA 98499
>
> Toll Free: 866-504-8990
> 24 hr pager: 800-745-6113
> Phone: 253-588-8990
>
> He does a lot of work on the Birds for the Air Force and the
Army.
> He is located just off I-5 at Hwy 512. If you decide to check
them
> out give them a call and ask them for directions. I could get you
> there but I would imagine they have easier directions than mine
would
> be.
>
> I hope this helps.
>
> Marv Wheeler
> 2004 M380
> Ocean Shores, WA
>
> --- In WanderlodgeForum@yahoogroups.com, "Andy Coleman"
> wrote:
> >
> > Hello fellow Wanderlodgers,
> >
> > Can anyone recommend a good machine shop in the Seattle/Tacoma
> area?
> > We're far from home (New Jersey) and getting some bad bearing
> noises
> > from our clutch fan assembly. We have the bearings for it but
> don't
> > know where to go...
> >
> > Any help would be greatly appreciated.
> >
> > Thanks!
> >
> > Andy Coleman
> > 83 FC35 Spring Lake, NJ
> >
>
I agree with Marv.
I pass that KOA every morning going to work.
Crowded sucker, isn't it?
Bob Lawrence
84 PT36
Tacky Tacoma, Wa.
>
> Thank you Marv -
>
> I'm going to contact Martin first thing in the morning.
>
> I'm staying in the KOA Campground outside Seattle for a few days.
> Hoping to pull off the fan & clutch and bring it to Martin (or
> somebody he recommends) to fix while we tour Seattle for the first
> time.
>
> Boy is this Wanderlodge Forum a great resource! Thank you everyone
> who responded!
>
> Andy
> 83 FC-35
> Spring Lake, NJ
>
> --- In
WanderlodgeForum@yahoogroups.com, "Marv & Jean"
>
wrote:
> >
> > Andy:
> >
> > Welcome to the Northwest but sorry you are having trouble. I
> can't
> > recomment a machine shop but there is a place that a number of
> Blue
> > Bird owners use. Martin is a good guy and will treat you right.
> >
> > M & M Truck Maintenance
> > 3421 Chapel Street S
> > Lakewood WA 98499
> >
> > Toll Free: 866-504-8990
> > 24 hr pager: 800-745-6113
> > Phone: 253-588-8990
> >
> > He does a lot of work on the Birds for the Air Force and the
> Army.
> > He is located just off I-5 at Hwy 512. If you decide to check
> them
> > out give them a call and ask them for directions. I could get
you
> > there but I would imagine they have easier directions than mine
> would
> > be.
> >
> > I hope this helps.
> >
> > Marv Wheeler
> > 2004 M380
> > Ocean Shores, WA
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Andy Coleman"
> > wrote:
> > >
> > > Hello fellow Wanderlodgers,
> > >
> > > Can anyone recommend a good machine shop in the Seattle/Tacoma
> > area?
> > > We're far from home (New Jersey) and getting some bad bearing
> > noises
> > > from our clutch fan assembly. We have the bearings for it but
> > don't
> > > know where to go...
> > >
> > > Any help would be greatly appreciated.
> > >
> > > Thanks!
> > >
> > > Andy Coleman
> > > 83 FC35 Spring Lake, NJ
> > >
> >
>