Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Full Version: 6 wire toad connector
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

David Brady

Folks,

I'm wiring my toad and need to know which connector
the tail lights connects to. It's a six pin connector. Ground,
Left Turn, and Right Turn are clearly labled. That leaves
3 connectors labeled: S, TM, and A. Which of these connects
to the tail lights?

Thanks,
David Brady
'02 LXi, Smokey
NC

Leroy Eckert

Viewed from the back of the plug on the coach it should be as follows: No
guarantee, check with a test light with the park lights on to verify.

In a circle: 12 O'clock TM trailer lights. 2 O'clock Electric Brakes(S), 5
O'clock Right Turn, Screw hole at 6 O'clock, 8 O'clock Left Turn, 10 O'clock
Ground(GD), and center 12v presumably for battery charge. Mirror image the
sequence for the Toad. That is what I have in my file.
Hope this helps.

Leroy Eckert
1990 WB-40"Smoke N Mirrors"
Niceville, FL
----- Original Message -----
From: David Brady
To: WanderlodgeForum@yahoogroups.com ; wanderlodge@yahoogroups.com
Sent: Wednesday, May 23, 2007 7:03 PM
Subject: [WanderlodgeForum] 6 wire toad connector


Folks,

I'm wiring my toad and need to know which connector
the tail lights connects to. It's a six pin connector. Ground,
Left Turn, and Right Turn are clearly labled. That leaves
3 connectors labeled: S, TM, and A. Which of these connects
to the tail lights?

Thanks,
David Brady
'02 LXi, Smokey
NC




[Non-text portions of this message have been removed]

David Brady

Got it. Thanks Leroy,

David Brady
'02 LXi, Smokey
NC

Leroy Eckert wrote:
>
> Viewed from the back of the plug on the coach it should be as follows:
> No guarantee, check with a test light with the park lights on to verify.
>
> In a circle: 12 O'clock TM trailer lights. 2 O'clock Electric
> Brakes(S), 5 O'clock Right Turn, Screw hole at 6 O'clock, 8 O'clock
> Left Turn, 10 O'clock Ground(GD), and center 12v presumably for
> battery charge. Mirror image the sequence for the Toad. That is what I
> have in my file.
> Hope this helps.
>
> Leroy Eckert
> 1990 WB-40"Smoke N Mirrors"
> Niceville, FL
> ----- Original Message -----
> From: David Brady
> To: WanderlodgeForum@yahoogroups.com
> ;
> wanderlodge@yahoogroups.com
> Sent: Wednesday, May 23, 2007 7:03 PM
> Subject: [WanderlodgeForum] 6 wire toad connector
>
> Folks,
>
> I'm wiring my toad and need to know which connector
> the tail lights connects to. It's a six pin connector. Ground,
> Left Turn, and Right Turn are clearly labled. That leaves
> 3 connectors labeled: S, TM, and A. Which of these connects
> to the tail lights?
>
> Thanks,
> David Brady
> '02 LXi, Smokey
> NC
>
> [Non-text portions of this message have been removed]
>
>
> ------------------------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.467 / Virus Database: 269.7.6/815 - Release Date: 5/22/2007 3:49
PM
>



[Non-text portions of this message have been removed]

pattypape

Smokey

There is a drawing of the BB rear plug in the files of this forum.
This may help.

Bill 88 FC Michigan



--- In WanderlodgeForum@yahoogroups.com, David Brady wrote:
>
> Folks,
>
> I'm wiring my toad and need to know which connector
> the tail lights connects to. It's a six pin connector. Ground,
> Left Turn, and Right Turn are clearly labled. That leaves
> 3 connectors labeled: S, TM, and A. Which of these connects
> to the tail lights?
>
> Thanks,
> David Brady
> '02 LXi, Smokey
> NC
>

Gregory OConnor

Dave, I never try and remember what is what. I test with a test light
every time. if you have amber turns, the stop and turn are
seperate. My 94pt has volvo amber turns, but the origional plug at
the back of my bus is set up to share a turn and stop I am sure there
are diodes someplace. You need air pressure to glow the stop
taillights. When I complete a connection I pump the socket full of
bathroom silicone. I am not a fan of Dielectric grease because it
melts off and traps in road salt on old connections.

GregoryO'Connor
94ptRomolandCa

--- In WanderlodgeForum@yahoogroups.com, David Brady
wrote:
>
> Folks,
>
> I'm wiring my toad and need to know which connector
> the tail lights connects to. It's a six pin connector. Ground,
> Left Turn, and Right Turn are clearly labled. That leaves
> 3 connectors labeled: S, TM, and A. Which of these connects
> to the tail lights?
>
> Thanks,
> David Brady
> '02 LXi, Smokey
> NC
>
Reference URL's