Terry Neal
02-29-2008, 14:01
George, do you need a headlight switch? I have a couple of new ones
from BB. Can check the part number for you if you have the number for
your switch?
Terry
Terry Neal
Bozeman, MT
82PT40 6V92TA
74FC34 6V53T
George Burke wrote:
My headlight switch has smoked its self. The connector went out
with
it. BB doesn't carry the connector, found at NAPA, EC20, along with the
switch, a Delco, which some parts places say is prone to failure. I
have found a wire that was in slot #3, (B/Y) that according to my BB
schematic, is supposed to be in slot #7. Maybe that is why my dash
lights won't dim, which was a previous problem. Also previously, I had
to jiggle the rod to get the headlights to come on sometimes. I have
had to do that once with the new switch. Has anyone had to deal with
this problem. Would be appreciative of some insight, as I am worried
that some other wire switching may have occured. I might add that on
this bus, when I replaced the gen.hr. meter, someone had crossed the
wires, putting the previous one to rest. You see why I am concerned
about correct wiring here. Thanks for any help, George Burke 1977 FC31
Charlotte