amweath
04-22-2007, 04:58
My tach moves all over the scale when running at highway speeds.
What drives the tach on a 6V92.
Another problem was most of my AC outlets went dead while using my
drill motor I had the generator running. I have to assume the gen. was
putting out because the AC recepticle where the microwave is plugged
in was still hot. I checked breakers in the AC box that is located in
one of the wardrobe closets
In all the manuals I got, there is no diagram of the AC circuitry -
several diagrams of the DC.
Concerning my fresh water tank - on futher investigation I have no
leak. Water must have been spilled when filling at the vent.
Art Weatherly
Riverside Ca.
'85 PT 36
What drives the tach on a 6V92.
Another problem was most of my AC outlets went dead while using my
drill motor I had the generator running. I have to assume the gen. was
putting out because the AC recepticle where the microwave is plugged
in was still hot. I checked breakers in the AC box that is located in
one of the wardrobe closets
In all the manuals I got, there is no diagram of the AC circuitry -
several diagrams of the DC.
Concerning my fresh water tank - on futher investigation I have no
leak. Water must have been spilled when filling at the vent.
Art Weatherly
Riverside Ca.
'85 PT 36