Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Bob,

Only the power switch is still active and I use it to power up the LCD
monitor. Rest of controls are on the monitor which fits exactly in the same
hole. George Morris at Bleakley did the installation. He worked at BB on
the WL line for many years and is a real wizard with vintage birds. Old
cable was left in because of labor considerations to remove. I had the same
symptoms with the old tube monitor, blooming picture and the longer the set
stayed on, the worse it became. The Sony with sound makes communications
when maneuvering with a helper a cinch. Think I've answered all.

Ed McDowell
89FC35
Bonaire, Ga


[Non-text portions of this message have been removed]

Hi ED,

Do you have the model numbers and manufacturers of the camera and
display ?? Does it fit in the same cut out in the over head, as the
old display???

Bill 88 FC

--- In WanderlodgeForum@yahoogroups.com, "Ed McDowell"
wrote:
>
> Bob,
>
> Only the power switch is still active and I use it to power up the
LCD
> monitor. Rest of controls are on the monitor which fits exactly in
the same
> hole. George Morris at Bleakley did the installation. He worked at
BB on
> the WL line for many years and is a real wizard with vintage birds.
Old
> cable was left in because of labor considerations to remove. I had
the same
> symptoms with the old tube monitor, blooming picture and the longer
the set
> stayed on, the worse it became. The Sony with sound makes
communications
> when maneuvering with a helper a cinch. Think I've answered all.
>
> Ed McDowell
> 89FC35
> Bonaire, Ga
>
>
> [Non-text portions of this message have been removed]
>