Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Where is a bargain source for subject model??
Any deals out there?
Thanks,
Hank Hannigan
90SP36

Hank, how ya doin'? We met at the SWBB Rally in Quartzsite. Since you
brought up the Sharpe convection microwave. I have one also. It
doesn't work. Wondering if anyone has ideas what the problem may be?
The outlet has power. Are these things worth repairing? And how do
you get them out of the mounting?

--- In WanderlodgeForum@yahoogroups.com, "Henry Jay Hannigan"
wrote:
>
> Where is a bargain source for subject model??
> Any deals out there?
> Thanks,
> Hank Hannigan
> 90SP36
>

My old Sharpe crapped out and I replaced it with a new upgraded model. The new
model has many more functions than the older model, and like all newer models
works much better than the old. I changed from black to stainless. I googled
around and the price was aroung $500. Call the repair man, get it repaired if
you can and it is still old. I could not find a repair person to come to the
coach. So, if I gotta take it out and run around, time is money. I put the new
one in. Choose you own poision. <<<<<<<<<:>>>>>>>>>

Leroy Eckert
1990 WB-40"Smoke N Mirrors"
Niceville, FL



----- Original Message -----
From: Keith Strehle
To: WanderlodgeForum@yahoogroups.com
Sent: Wednesday, February 28, 2007 10:12 AM
Subject: [WanderlodgeForum] Re: Sharp convection microwave model R930CS for my
90SP36 needed....WHERE???


Hank, how ya doin'? We met at the SWBB Rally in Quartzsite. Since you
brought up the Sharpe convection microwave. I have one also. It
doesn't work. Wondering if anyone has ideas what the problem may be?
The outlet has power. Are these things worth repairing? And how do
you get them out of the mounting?

--- In WanderlodgeForum@yahoogroups.com, "Henry Jay Hannigan"
wrote:
>
> Where is a bargain source for subject model??
> Any deals out there?
> Thanks,
> Hank Hannigan
> 90SP36
>





[Non-text portions of this message have been removed]

Keith,

Congrats with the new bus! According to the guy that repaired my
Sharp, he said they are well worth keeping. You'll have to removed
all the stainless panels around the unit and remove screws from the
bottom. Anyway, once you get it out (it's a little heavy) you can
remove the face and find a fuse inside there. Check the fuse first.
If it continues to blow, you might have it repaired. Mine was for
about $70.

Ron, No. California
85PT36

PS. Make sure your jacks are retracted before filling with fluid or
you'll get an ATF bath.

Are these things worth repairing? And how do
> you get them out of the mounting?
>
> --- In WanderlodgeForum@yahoogroups.com, "Henry Jay Hannigan"
> wrote:
> >
> > Where is a bargain source for subject model??
> > Any deals out there?
> > Thanks,
> > Hank Hannigan
> > 90SP36
> >
>

Hank,
I purchased a new Black R-930AK Sharp Convection Microwave Oven in Jan 07 from
www dot qualitymatters dot com. They had the best price I found.
Howard Truitt, 86 PT40, Camilla, Ga.


----- Original Message -----
From: Henry Jay Hannigan
To: WanderlodgeForum@yahoogroups.com
Sent: Wednesday, February 28, 2007 10:53 AM
Subject: [WanderlodgeForum] Sharp convection microwave model R930CS for my
90SP36 needed....WHERE???


Where is a bargain source for subject model??
Any deals out there?
Thanks,
Hank Hannigan
90SP36






------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.412 / Virus Database: 268.18.3/697 - Release Date: 2/22/2007


[Non-text portions of this message have been removed]

---Thanks for the reply Howard...I just purchased a R930CS last
night at Lowes in Vegas.....special order takes 12 working
days..$525 after the politicians cut of 7.7%.
I got the stainless one..had the black original..hope we like the
stainless.
Thanks again.......beautiful time to be in vegas

If you have time, go to ..cardplayer.com,..click on tournements at
the top and then click ..schedule & results...scroll down to ..WYNN
classic and go to ..sunday feb 25th $1000+60 and
click ..results....check out number 12.....
a BIRD rep in vegas!!!
Still trying for the BIG one so I can special order a upgraded 2008
SP38 with MIDdoor and all the trimmings from bluebird! LOL
Hank Hannigan
90SP36





In WanderlodgeForum@yahoogroups.com, "Howard O. Truitt"
wrote:
>
> Hank,
> I purchased a new Black R-930AK Sharp Convection Microwave Oven in
Jan 07 from www dot qualitymatters dot com. They had the best price
I found.
> Howard Truitt, 86 PT40, Camilla, Ga.
>
>
> ----- Original Message -----
> From: Henry Jay Hannigan
> To: WanderlodgeForum@yahoogroups.com
> Sent: Wednesday, February 28, 2007 10:53 AM
> Subject: [WanderlodgeForum] Sharp convection microwave model
R930CS for my 90SP36 needed....WHERE???
>
>
> Where is a bargain source for subject model??
> Any deals out there?
> Thanks,
> Hank Hannigan
> 90SP36
>
>
>
>
>
>
> -------------------------------------------------------------------
-----------
>
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.412 / Virus Database: 268.18.3/697 - Release Date:
2/22/2007
>
>
> [Non-text portions of this message have been removed]
>

--- Hey Howard!
I went to ..qualitymatters.com and total price was $505..BUT they
are out of stock...I would have saved $20.......
Thanks for the info for my next purchase..I will look there first!
LOL
Hank Hannigan
90SP36







In WanderlodgeForum@yahoogroups.com, "Howard O. Truitt"
wrote:
>
> Hank,
> I purchased a new Black R-930AK Sharp Convection Microwave Oven in
Jan 07 from www dot qualitymatters dot com. They had the best price
I found.
> Howard Truitt, 86 PT40, Camilla, Ga.
>
>
> ----- Original Message -----
> From: Henry Jay Hannigan
> To: WanderlodgeForum@yahoogroups.com
> Sent: Wednesday, February 28, 2007 10:53 AM
> Subject: [WanderlodgeForum] Sharp convection microwave model
R930CS for my 90SP36 needed....WHERE???
>
>
> Where is a bargain source for subject model??
> Any deals out there?
> Thanks,
> Hank Hannigan
> 90SP36
>
>
>
>
>
>
> -------------------------------------------------------------------
-----------
>
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.412 / Virus Database: 268.18.3/697 - Release Date:
2/22/2007
>
>
> [Non-text portions of this message have been removed]
>

Thanks Leroy, if I can get the old one going I'll stick with that for
the time being. Get things working and plan upgrades later. That's
my plan. I want to get things in order so I can go to Baja this
summer and spend a bunch of time fishing...


--- In WanderlodgeForum@yahoogroups.com, "Leroy Eckert"
wrote:
>
>
> My old Sharpe crapped out and I replaced it with a new upgraded
model. The new model has many more functions than the older model,
and like all newer models works much better than the old. I changed
from black to stainless. I googled around and the price was aroung
$500. Call the repair man, get it repaired if you can and it is
still old. I could not find a repair person to come to the coach.
So, if I gotta take it out and run around, time is money. I put the
new one in. Choose you own poision. <<<<<<<<<:>>>>>>>>>
>
> Leroy Eckert
> 1990 WB-40"Smoke N Mirrors"
> Niceville, FL
>
>
>
> ----- Original Message -----
> From: Keith Strehle
> To: WanderlodgeForum@yahoogroups.com
> Sent: Wednesday, February 28, 2007 10:12 AM
> Subject: [WanderlodgeForum] Re: Sharp convection microwave model
R930CS for my 90SP36 needed....WHERE???
>
>
> Hank, how ya doin'? We met at the SWBB Rally in Quartzsite. Since
you
> brought up the Sharpe convection microwave. I have one also. It
> doesn't work. Wondering if anyone has ideas what the problem may
be?
> The outlet has power. Are these things worth repairing? And how
do
> you get them out of the mounting?
>
> --- In WanderlodgeForum@yahoogroups.com, "Henry Jay Hannigan"
> wrote:
> >
> > Where is a bargain source for subject model??
> > Any deals out there?
> > Thanks,
> > Hank Hannigan
> > 90SP36
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

--- In WanderlodgeForum@yahoogroups.com, "Ron & Patty"
wrote:
>
> Keith,
>
> Congrats with the new bus! According to the guy that repaired my
> Sharp, he said they are well worth keeping. You'll have to removed
> all the stainless panels around the unit and remove screws from the
> bottom. Anyway, once you get it out (it's a little heavy) you can
> remove the face and find a fuse inside there. Check the fuse first.
> If it continues to blow, you might have it repaired. Mine was for
> about $70.
>
> Ron, No. California
> 85PT36
>
> PS. Make sure your jacks are retracted before filling with fluid or
> you'll get an ATF bath.
>
> Are these things worth repairing? And how do
> > you get them out of the mounting?
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Henry Jay Hannigan"
> > wrote:
> > >
> > > Where is a bargain source for subject model??
> > > Any deals out there?
> > > Thanks,
> > > Hank Hannigan
> > > 90SP36
> > >
> >
>
Ron,
Where is that fuse for the Sharp convection microwave located exactly.
Also, did you find someone to work on it in the Sacto area?
I ran mine without anything inside. I know, it says in the book not
to operate the oven empty....oops

Harold Prescott
'85 FC35
Northern California

A local guy fixed my original Sharp Convection/Micro, a couple of micro
switches. Said; DON'T OPEN DOOR WHEN THE OVEN IS OPERATING, SHUT IT OFF FIRST!
He was very assertive about that point.
MH
----- Original Message -----
From: Harold Prescott
To: WanderlodgeForum@yahoogroups.com
Sent: Friday, March 02, 2007 11:14 AM
Subject: [WanderlodgeForum] Re: Sharp convection microwave model R930CS for my
90SP36 needed....WHERE???


--- In WanderlodgeForum@yahoogroups.com, "Ron & Patty"
wrote:
>
> Keith,
>
> Congrats with the new bus! According to the guy that repaired my
> Sharp, he said they are well worth keeping. You'll have to removed
> all the stainless panels around the unit and remove screws from the
> bottom. Anyway, once you get it out (it's a little heavy) you can
> remove the face and find a fuse inside there. Check the fuse first.
> If it continues to blow, you might have it repaired. Mine was for
> about $70.
>
> Ron, No. California
> 85PT36
>
> PS. Make sure your jacks are retracted before filling with fluid or
> you'll get an ATF bath.
>
> Are these things worth repairing? And how do
> > you get them out of the mounting?
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Henry Jay Hannigan"
> > wrote:
> > >
> > > Where is a bargain source for subject model??
> > > Any deals out there?
> > > Thanks,
> > > Hank Hannigan
> > > 90SP36
> > >
> >
>
Ron,
Where is that fuse for the Sharp convection microwave located exactly.
Also, did you find someone to work on it in the Sacto area?
I ran mine without anything inside. I know, it says in the book not
to operate the oven empty....oops

Harold Prescott
'85 FC35
Northern California





[Non-text portions of this message have been removed]