Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Full Version: Camera
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2

jwasnewski

My camera is intermittant. When it works it has a shape picture. I
believe the potentiometer is going in the tank. I have contacted Tim
at RVcams and am awaiting a response.

Info:

Camera is Sanyo CCD Computar Wide Attack, Model VDC 3800
Tube is Clinton Tiawan Corp
Potentiometer is A-B Mod Pot PN 26M955. Cannot locate one even at a
guitar parts house to see if it is the problem- I'm told they are
unavailable. I'm about to give up and retrofit.

I saw a post where someone retrofitted a system without rewiring the
bus. Any info would help. Good or Bad. Thanks.

Leroy Eckert
1990 WB-40 "Smoke N Mirrors"
Niceville, FL

one_dusty_hoot

--- In WanderlodgeForum@yahoogroups.com, "jwasnewski"
wrote:
>
> My camera is intermittant. When it works it has a shape picture.
I
> believe the potentiometer is going in the tank. I have contacted
Tim
> at RVcams and am awaiting a response.
>
> Info:
>
> Camera is Sanyo CCD Computar Wide Attack, Model VDC 3800
> Tube is Clinton Tiawan Corp
> Potentiometer is A-B Mod Pot PN 26M955. Cannot locate one even at a
> guitar parts house to see if it is the problem- I'm told they are
> unavailable. I'm about to give up and retrofit.
>
> I saw a post where someone retrofitted a system without rewiring
the
> bus. Any info would help. Good or Bad. Thanks.
>
> Leroy Eckert
> 1990 WB-40 "Smoke N Mirrors"
> Niceville, FL
>

one_dusty_hoot

--- In WanderlodgeForum@yahoogroups.com, "jwasnewski"
wrote:
>
> My camera is intermittant. When it works it has a shape picture.
I
> believe the potentiometer is going in the tank. I have contacted
Tim
> at RVcams and am awaiting a response.
>
> Info:
>
> Camera is Sanyo CCD Computar Wide Attack, Model VDC 3800
> Tube is Clinton Tiawan Corp
> Potentiometer is A-B Mod Pot PN 26M955. Cannot locate one even at a
> guitar parts house to see if it is the problem- I'm told they are
> unavailable. I'm about to give up and retrofit.
>
> I saw a post where someone retrofitted a system without rewiring
the
> bus. Any info would help. Good or Bad. Thanks.
>
> Leroy Eckert
> 1990 WB-40 "Smoke N Mirrors"
> Niceville, FL
>

one_dusty_hoot

Sorry, I hit the wrong "thingie"

Leroy,
Since you do have a good picture when it is
working you might try replacing the potentiometer
if it is the one overhead apart from the TV.

Pot is an abreviation for the word potentiometer.
3 terminals, one in the center is a wiper and
gets a glaze from use. Sometimes a spray into the
opening will clear it up.

Two major concerns on replacement are resistance
value and wattage, along with shaft configuration.
Disconnected, measure the resistance between the
outer terminals, this will determine resistance value.
Physical size will determine wattage. Even if the
part number doesn't match you can replace from an
electronics shop of the web.

bob janes, 87fc35, greenville, sc

--- In WanderlodgeForum@yahoogroups.com, "jwasnewski"
wrote:
>
> My camera is intermittant. When it works it has a shape picture.
I
> believe the potentiometer is going in the tank. I have contacted
Tim
> at RVcams and am awaiting a response.
>
> Info:
>
> Camera is Sanyo CCD Computar Wide Attack, Model VDC 3800
> Tube is Clinton Tiawan Corp
> Potentiometer is A-B Mod Pot PN 26M955. Cannot locate one even at a
> guitar parts house to see if it is the problem- I'm told they are
> unavailable. I'm about to give up and retrofit.
>
> I saw a post where someone retrofitted a system without rewiring
the
> bus. Any info would help. Good or Bad. Thanks.
>
> Leroy Eckert
> 1990 WB-40 "Smoke N Mirrors"
> Niceville, FL
>

Leroy Eckert

Thanks Bob:
I think mine is called a concentric potentiometer, I am not certain, it appears
to be a sealed version, has two dials one on top of the other similar to the old
volume, bass controls on a car radio and it says it is 100/500K. I think it has
6 small wires. It is used for contrast and brightness on the tube. I went to
the web on a guitar site and see some similar but the ratings are different.
Then I have to do something with the knobs. Thanks in advance for your help.

Leroy Eckert
1990 WB-40"smoke N Mirrors"
Niceville,FL






----- Original Message -----
From: one_dusty_hoot
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, February 11, 2007 12:49 PM
Subject: [WanderlodgeForum] Re: Camera


Sorry, I hit the wrong "thingie"

Leroy,
Since you do have a good picture when it is
working you might try replacing the potentiometer
if it is the one overhead apart from the TV.

Pot is an abreviation for the word potentiometer.
3 terminals, one in the center is a wiper and
gets a glaze from use. Sometimes a spray into the
opening will clear it up.

Two major concerns on replacement are resistance
value and wattage, along with shaft configuration.
Disconnected, measure the resistance between the
outer terminals, this will determine resistance value.
Physical size will determine wattage. Even if the
part number doesn't match you can replace from an
electronics shop of the web.

bob janes, 87fc35, greenville, sc

--- In WanderlodgeForum@yahoogroups.com, "jwasnewski"
wrote:
>
> My camera is intermittant. When it works it has a shape picture.
I
> believe the potentiometer is going in the tank. I have contacted
Tim
> at RVcams and am awaiting a response.
>
> Info:
>
> Camera is Sanyo CCD Computar Wide Attack, Model VDC 3800
> Tube is Clinton Tiawan Corp
> Potentiometer is A-B Mod Pot PN 26M955. Cannot locate one even at a
> guitar parts house to see if it is the problem- I'm told they are
> unavailable. I'm about to give up and retrofit.
>
> I saw a post where someone retrofitted a system without rewiring
the
> bus. Any info would help. Good or Bad. Thanks.
>
> Leroy Eckert
> 1990 WB-40 "Smoke N Mirrors"
> Niceville, FL
>





[Non-text portions of this message have been removed]

Curt Sprenger

Leroy,

I sent to you the information that I recorded when doing our backup
camera and LCD project. Hope it helps. Good luck.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, Calif.



Leroy Eckert wrote:

> Thanks Bob:
> I think mine is called a concentric potentiometer, I am not certain,
> it appears to be a sealed version, has two dials one on top of the
> other similar to the old volume, bass controls on a car radio and it
> says it is 100/500K. I think it has 6 small wires. It is used for
> contrast and brightness on the tube. I went to the web on a guitar
> site and see some similar but the ratings are different. Then I have
> to do something with the knobs. Thanks in advance for your help.
>
> Leroy Eckert
> 1990 WB-40"smoke N Mirrors"
> Niceville,FL
>
> ----- Original Message -----
> From: one_dusty_hoot
> To: WanderlodgeForum@yahoogroups.com
>
> Sent: Sunday, February 11, 2007 12:49 PM
> Subject: [WanderlodgeForum] Re: Camera
>
> Sorry, I hit the wrong "thingie"
>
> Leroy,
> Since you do have a good picture when it is
> working you might try replacing the potentiometer
> if it is the one overhead apart from the TV.
>
> Pot is an abreviation for the word potentiometer.
> 3 terminals, one in the center is a wiper and
> gets a glaze from use. Sometimes a spray into the
> opening will clear it up.
>
> Two major concerns on replacement are resistance
> value and wattage, along with shaft configuration.
> Disconnected, measure the resistance between the
> outer terminals, this will determine resistance value.
> Physical size will determine wattage. Even if the
> part number doesn't match you can replace from an
> electronics shop of the web.
>
> bob janes, 87fc35, greenville, sc
>
> --- In WanderlodgeForum@yahoogroups.com
> , "jwasnewski"
> wrote:
> >
> > My camera is intermittant. When it works it has a shape picture.
> I
> > believe the potentiometer is going in the tank. I have contacted
> Tim
> > at RVcams and am awaiting a response.
> >
> > Info:
> >
> > Camera is Sanyo CCD Computar Wide Attack, Model VDC 3800
> > Tube is Clinton Tiawan Corp
> > Potentiometer is A-B Mod Pot PN 26M955. Cannot locate one even at a
> > guitar parts house to see if it is the problem- I'm told they are
> > unavailable. I'm about to give up and retrofit.
> >
> > I saw a post where someone retrofitted a system without rewiring
> the
> > bus. Any info would help. Good or Bad. Thanks.
> >
> > Leroy Eckert
> > 1990 WB-40 "Smoke N Mirrors"
> > Niceville, FL
> >
>
> [Non-text portions of this message have been removed]
>
>

Leroy Eckert

Thank you.
Leroy Eckert
1990 WB-40"Smoke N Mirrors"
Niceville, FL


----- Original Message -----
From: Curt Sprenger
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, February 11, 2007 1:37 PM
Subject: Re: [WanderlodgeForum] Re: Camera


Leroy,

I sent to you the information that I recorded when doing our backup
camera and LCD project. Hope it helps. Good luck.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, Calif.

Leroy Eckert wrote:

> Thanks Bob:
> I think mine is called a concentric potentiometer, I am not certain,
> it appears to be a sealed version, has two dials one on top of the
> other similar to the old volume, bass controls on a car radio and it
> says it is 100/500K. I think it has 6 small wires. It is used for
> contrast and brightness on the tube. I went to the web on a guitar
> site and see some similar but the ratings are different. Then I have
> to do something with the knobs. Thanks in advance for your help.
>
> Leroy Eckert
> 1990 WB-40"smoke N Mirrors"
> Niceville,FL
>
> ----- Original Message -----
> From: one_dusty_hoot
> To: WanderlodgeForum@yahoogroups.com
>
> Sent: Sunday, February 11, 2007 12:49 PM
> Subject: [WanderlodgeForum] Re: Camera
>
> Sorry, I hit the wrong "thingie"
>
> Leroy,
> Since you do have a good picture when it is
> working you might try replacing the potentiometer
> if it is the one overhead apart from the TV.
>
> Pot is an abreviation for the word potentiometer.
> 3 terminals, one in the center is a wiper and
> gets a glaze from use. Sometimes a spray into the
> opening will clear it up.
>
> Two major concerns on replacement are resistance
> value and wattage, along with shaft configuration.
> Disconnected, measure the resistance between the
> outer terminals, this will determine resistance value.
> Physical size will determine wattage. Even if the
> part number doesn't match you can replace from an
> electronics shop of the web.
>
> bob janes, 87fc35, greenville, sc
>
> --- In WanderlodgeForum@yahoogroups.com
> , "jwasnewski"
> wrote:
> >
> > My camera is intermittant. When it works it has a shape picture.
> I
> > believe the potentiometer is going in the tank. I have contacted
> Tim
> > at RVcams and am awaiting a response.
> >
> > Info:
> >
> > Camera is Sanyo CCD Computar Wide Attack, Model VDC 3800
> > Tube is Clinton Tiawan Corp
> > Potentiometer is A-B Mod Pot PN 26M955. Cannot locate one even at a
> > guitar parts house to see if it is the problem- I'm told they are
> > unavailable. I'm about to give up and retrofit.
> >
> > I saw a post where someone retrofitted a system without rewiring
> the
> > bus. Any info would help. Good or Bad. Thanks.
> >
> > Leroy Eckert
> > 1990 WB-40 "Smoke N Mirrors"
> > Niceville, FL
> >
>
> [Non-text portions of this message have been removed]
>
>





[Non-text portions of this message have been removed]

Rob Robinson

Hi Leroy, Like Curt I also revamped my back-up camera system. I bought from
Tim at http://www.rvcams.com . I used existing coax cable with a radio shack S to
Coax cable conversion. Sorry can't remember the part number.

On 11/02/07, jwasnewski wrote:
>
> My camera is intermittant. When it works it has a shape picture. I
> believe the potentiometer is going in the tank. I have contacted Tim
> at RVcams and am awaiting a response.
>
> Info:
>
> Camera is Sanyo CCD Computar Wide Attack, Model VDC 3800
> Tube is Clinton Tiawan Corp
> Potentiometer is A-B Mod Pot PN 26M955. Cannot locate one even at a
> guitar parts house to see if it is the problem- I'm told they are
> unavailable. I'm about to give up and retrofit.
>
> I saw a post where someone retrofitted a system without rewiring the
> bus. Any info would help. Good or Bad. Thanks.
>
> Leroy Eckert
> 1990 WB-40 "Smoke N Mirrors"
> Niceville, FL
>
>
>



--
Rob, Sue & Merlin Robinson
94 WLWB


[Non-text portions of this message have been removed]

Leroy Eckert

Thanks for the info. I'm about ready to junk the old one and update. By the
time I fix the old one I still have an old one.

Leroy Eckert
1990 WB-40"Smoke N Mirrors"
Niceville, FL



----- Original Message -----
From: Rob Robinson
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, February 11, 2007 2:19 PM
Subject: Re: [WanderlodgeForum] Camera


Hi Leroy, Like Curt I also revamped my back-up camera system. I bought from
Tim at http://www.rvcams.com . I used existing coax cable with a radio shack S to
Coax cable conversion. Sorry can't remember the part number.

On 11/02/07, jwasnewski wrote:
>
> My camera is intermittant. When it works it has a shape picture. I
> believe the potentiometer is going in the tank. I have contacted Tim
> at RVcams and am awaiting a response.
>
> Info:
>
> Camera is Sanyo CCD Computar Wide Attack, Model VDC 3800
> Tube is Clinton Tiawan Corp
> Potentiometer is A-B Mod Pot PN 26M955. Cannot locate one even at a
> guitar parts house to see if it is the problem- I'm told they are
> unavailable. I'm about to give up and retrofit.
>
> I saw a post where someone retrofitted a system without rewiring the
> bus. Any info would help. Good or Bad. Thanks.
>
> Leroy Eckert
> 1990 WB-40 "Smoke N Mirrors"
> Niceville, FL
>
>
>

--
Rob, Sue & Merlin Robinson
94 WLWB

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

Gregory OConnor

Leroy, I dont know what part in the Backup camera does the image
reversing but that is important to match if your replacement part
holds that obligation.

GregoryO'Connor
94ptRomolandCa

--- In WanderlodgeForum@yahoogroups.com, "Leroy Eckert"
wrote:
>
> Thanks for the info. I'm about ready to junk the old one and
update. By the time I fix the old one I still have an old one.
>
> Leroy Eckert
> 1990 WB-40"Smoke N Mirrors"
> Niceville, FL
>
>
>
> ----- Original Message -----
> From: Rob Robinson
> To: WanderlodgeForum@yahoogroups.com
> Sent: Sunday, February 11, 2007 2:19 PM
> Subject: Re: [WanderlodgeForum] Camera
>
>
> Hi Leroy, Like Curt I also revamped my back-up camera system. I
bought from
> Tim at http://www.rvcams.com . I used existing coax cable with a radio
shack S to
> Coax cable conversion. Sorry can't remember the part number.
>
> On 11/02/07, jwasnewski wrote:
> >
> > My camera is intermittant. When it works it has a shape
picture. I
> > believe the potentiometer is going in the tank. I have
contacted Tim
> > at RVcams and am awaiting a response.
> >
> > Info:
> >
> > Camera is Sanyo CCD Computar Wide Attack, Model VDC 3800
> > Tube is Clinton Tiawan Corp
> > Potentiometer is A-B Mod Pot PN 26M955. Cannot locate one even
at a
> > guitar parts house to see if it is the problem- I'm told they
are
> > unavailable. I'm about to give up and retrofit.
> >
> > I saw a post where someone retrofitted a system without
rewiring the
> > bus. Any info would help. Good or Bad. Thanks.
> >
> > Leroy Eckert
> > 1990 WB-40 "Smoke N Mirrors"
> > Niceville, FL
> >
> >
> >
>
> --
> Rob, Sue & Merlin Robinson
> 94 WLWB
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
Pages: 1 2
Reference URL's