John
04-20-2005, 13:42
The radiator on my 1982 35FCRB 'Bird with a 3208NA and a Horton fan,
doesn't have a shroud and I want to have one made. Is there anybody
on here that has this combination of engine and fan, that can give me
the measurements of the the shroud, including the depth, height and
width and also the location of the shroud mounts. A photograph of the
mounts and shroud configuration would be helpful.
I believe that the fan was upgraded to the Horton and since it is
larger in diameter that the stock fan, I believe that one of the
previous owners just left the shroud off.
You can see a photo of what the setup looks like now by clicking on;
http://www.pbase.com/image/42350336
"REMEMBER SEPTEMBER 11, 2001"
John Finn
'82 35FCRB
BLUEBIRD WANDERLODGE
TO VISIT THE "FINN'S INN EXPRESS" REMODELING ADVENTURE
GO TO;
http://www.pbase.com/image/24977457
'66 SUPERIOR / IH 392 GAS V8 32' PUSHER "FOR SALE"
SEE THE OLD COACH AT:
http://www.pbase.com/image/26052733
HOPKINS, SOUTH CAROLINA
doesn't have a shroud and I want to have one made. Is there anybody
on here that has this combination of engine and fan, that can give me
the measurements of the the shroud, including the depth, height and
width and also the location of the shroud mounts. A photograph of the
mounts and shroud configuration would be helpful.
I believe that the fan was upgraded to the Horton and since it is
larger in diameter that the stock fan, I believe that one of the
previous owners just left the shroud off.
You can see a photo of what the setup looks like now by clicking on;
http://www.pbase.com/image/42350336
"REMEMBER SEPTEMBER 11, 2001"
John Finn
'82 35FCRB
BLUEBIRD WANDERLODGE
TO VISIT THE "FINN'S INN EXPRESS" REMODELING ADVENTURE
GO TO;
http://www.pbase.com/image/24977457
'66 SUPERIOR / IH 392 GAS V8 32' PUSHER "FOR SALE"
SEE THE OLD COACH AT:
http://www.pbase.com/image/26052733
HOPKINS, SOUTH CAROLINA