Wanderlodge Gurus - The Member Funded Wanderlodge Forum

I have a few items that are a constant pain. 1)tire valve stems keep
leaking ,I have replaced them , an in about 30 days when you check the
air pressure it will keep leaking.2) My fauset in the kitchen keep
leaking ,I checked the o-ring, it looks good.it now sprays out all
over.3)My ice maker now will not drop the ice on regular intervals.The
wire gaurd will remain in the up position when you push it down it
will drop ice.if any one can give me any advice that would be great.
Dave 91 WLWB 40

You have to be careful when either letting a tire shop replace your
valve stems or buying them yourself. There is a big difference in
quality today with many of them made in china. I had a bad one and it
turned out it was a chinese stem and had a cheap rubber grommet. Got
all new ones from Prier tire http://www.priertiresupply.com/ very
nice chrome plated ones for aluminum truck wheels $3.29 each (TR
509S) about $3.00 cheaper then chinese ones locally. I bought enough
for all my tires and a few spares to carry with me. They come with
valve cores and a nice chrome plated steel cap with oring.

tom warner
Vernon Center,NY
1985 PT 40

At 06:24 PM 9/4/2006, you wrote:
>I have a few items that are a constant pain. 1)tire valve stems keep
>leaking ,I have replaced them , an in about 30 days when you check the
>air pressure it will keep leaking.2) My fauset in the kitchen keep
>leaking ,I checked the o-ring, it looks good.it now sprays out all
>over.3)My ice maker now will not drop the ice on regular intervals.The
>wire gaurd will remain in the up position when you push it down it
>will drop ice.if any one can give me any advice that would be great.
>Dave 91 WLWB 40
>

Will these work with any brand balancing beads in the tires?

Troy Tikalsky
Waconia, MN
1986 Newell


----- Original Message -----
From: Tom Warner
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, September 04, 2006 6:11 PM
Subject: Re: [WanderlodgeForum] minor problems 91 PT


You have to be careful when either letting a tire shop replace your
valve stems or buying them yourself. There is a big difference in
quality today with many of them made in china. I had a bad one and it
turned out it was a chinese stem and had a cheap rubber grommet. Got
all new ones from Prier tire http://www.priertiresupply.com/ very
nice chrome plated ones for aluminum truck wheels $3.29 each (TR
509S) about $3.00 cheaper then chinese ones locally. I bought enough
for all my tires and a few spares to carry with me. They come with
valve cores and a nice chrome plated steel cap with oring.

tom warner
Vernon Center,NY
1985 PT 40

At 06:24 PM 9/4/2006, you wrote:
>I have a few items that are a constant pain. 1)tire valve stems keep
>leaking ,I have replaced them , an in about 30 days when you check the
>air pressure it will keep leaking.2) My fauset in the kitchen keep
>leaking ,I checked the o-ring, it looks good.it now sprays out all
>over.3)My ice maker now will not drop the ice on regular intervals.The
>wire gaurd will remain in the up position when you push it down it
>will drop ice.if any one can give me any advice that would be great.
>Dave 91 WLWB 40
>






[Non-text portions of this message have been removed]