doug_ngl
12-18-2006, 03:59
Happy Holidays to all, The weather was so nice here esterday, Lee and I
took Pokey out for a little drive and checked out some of my repairs.
Everything seems to be working, the Redi-Line works, the genset quit
smoking after a little warm up time. The cruise is working, but only
seems to work at speeds above 60 MPH. I was thinking that it should
start working at about 40 MPH. I see on the "Dana" green box down by
the accelerator pedal that there are some adjustments avaialble. They
are marked like "low speed", "centering ", "terminal adjustment" and I
think one more. Any ideas on if there is an adjustment to set the speed
at which the cruise becomes available? Thanks as always, Doug Engel,
Gunnison, CO, 1981 FC35SB, "Pokey"
took Pokey out for a little drive and checked out some of my repairs.
Everything seems to be working, the Redi-Line works, the genset quit
smoking after a little warm up time. The cruise is working, but only
seems to work at speeds above 60 MPH. I was thinking that it should
start working at about 40 MPH. I see on the "Dana" green box down by
the accelerator pedal that there are some adjustments avaialble. They
are marked like "low speed", "centering ", "terminal adjustment" and I
think one more. Any ideas on if there is an adjustment to set the speed
at which the cruise becomes available? Thanks as always, Doug Engel,
Gunnison, CO, 1981 FC35SB, "Pokey"