I think I have narrowed down my gremlin and it might be a relay in the
control box that has gone bad.
the relay is a Guardian electric 1395 series # 788TA does anybody know
where to get one or a similar relay that would work from napa/autozone?
thanks
Mike
80FC33
Taylor Mill, Ky 41015
Mike,
If that doesn't work take a look at the volt meter in the control box. Ours had
the same symptoms then we discovered that the meter had gone open. I just
bypassed it since it is not really used anyway. (This was on our '81FC31).
Good luck.
Dick Hayden - '87 PT 38 - Lake Stevens, WA
----- Original Message -----
From: Mike Meister
To: WanderlodgeForum@yahoogroups.com
Sent: Tuesday, June 27, 2006 3:54 PM
Subject: [WanderlodgeForum] Gen Set control box relay?
I think I have narrowed down my gremlin and it might be a relay in the
control box that has gone bad.
the relay is a Guardian electric 1395 series # 788TA does anybody know
where to get one or a similar relay that would work from napa/autozone?
thanks
Mike
80FC33
Taylor Mill, Ky 41015
[Non-text portions of this message have been removed]