Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Full Version: Perkins Generator Radiator Cap
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

Richard

Could some one tell me what pressure the cap should be for the
perkins / 12.5 kohler set up. the only markings on the cap is a "D9"

thank you
Richard in the Sunshime State
1981 FC 35 SB

Ralph L. Fullenwider

Richard:

Mine was a 7 psi cap on the "85 for the gen set.

Good choice on the tires and if you look on the overhead near the
windshield in front of the drivers area, you should see a tag there with
the tire information that your Coach came out of the factory with.

Safe travels,

Ralph and Charolette Fullenwider
Ralph's RV Solutions, Duncan, Oklahoma
http://home.swbell.net/rlf47/index.htm

At 12:07 AM 1/30/2006 +0000, you wrote:
>Could some one tell me what pressure the cap should be for the
>perkins / 12.5 kohler set up. the only markings on the cap is a "D9"
>
>thank you
>Richard in the Sunshime State
>1981 FC 35 SB
>
>
>
>
Reference URL's