Looking a a fluorescent ballast - 12 volt d.c. to fixes my lights above
the sink in a 1984 1/2 they need to be 1-9/16 W and 2-3/8 L. Received
one from John Drake Service but its to big and I would have to try and
modify the fixture to use it. Any suggestion?
Joe from IN
1984 1/2 PT 40
stephen birtles, _www.capeinnovation_ (
http://www.capeinnovation) has all
those- i bought several from him a few months ago. ernie-83pt40 in montana
[Non-text portions of this message have been removed]
http://store.solar-electric.com/12vodcbaforf.html
tom
1982 Fc35
Vernon Center,NY
At 03:31 AM 9/6/2005 +0000, you wrote:
>Looking a a fluorescent ballast - 12 volt d.c. to fixes my lights above
>the sink in a 1984 1/2 they need to be 1-9/16 W and 2-3/8 L. Received
>one from John Drake Service but its to big and I would have to try and
>modify the fixture to use it. Any suggestion?
>Joe from IN
>1984 1/2 PT 40
>
>
Joe,
Check with Thinlite. They have a flat rate repair program that
includes a new warranty. Do a search for thinlite's web site.
George Lowry
'95 WBDA 4203
Spearfish, SD Still at the Bird's Nest trying to get the dash air working
mjzakowski wrote:
> Looking a a fluorescent ballast - 12 volt d.c. to fixes my lights above
> the sink in a 1984 1/2 they need to be 1-9/16 W and 2-3/8 L. Received
> one from John Drake Service but its to big and I would have to try and
> modify the fixture to use it. Any suggestion?
> Joe from IN
> 1984 1/2 PT 40
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
Joe I think forum member Stephen Birtles has those ballasts as well.
I have used thinlite for my porch lite and they were great. They
rebuilt it and it did not work correctly and with no questions asked
they redid it again. Now it works great.
Scott B
86FC35
SC
--- In
WanderlodgeForum@yahoogroups.com, George Lowry
wrote:
> Joe,
>
> Check with Thinlite. They have a flat rate repair program that
> includes a new warranty. Do a search for thinlite's web site.
>
> George Lowry
> '95 WBDA 4203
> Spearfish, SD Still at the Bird's Nest trying to get the dash air
working
>
>
>
> mjzakowski wrote:
>
> > Looking a a fluorescent ballast - 12 volt d.c. to fixes my lights
above
> > the sink in a 1984 1/2 they need to be 1-9/16 W and 2-3/8 L.
Received
> > one from John Drake Service but its to big and I would have to
try and
> > modify the fixture to use it. Any suggestion?
> > Joe from IN
> > 1984 1/2 PT 40
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
yes we have ballasts you can do the replacement in a number of ways
either place in the ballast in the fixture or remaove the ballast
from the can it comes in and put in the fixture or lastly put
ballast beside fixture in between the 2 layers of the upper cupboard
and run the wires into the fixture
our ballasts are better built and more stable than thinlite
Stephen 77fc35
http://www.capeinnovation.com
--- In
WanderlodgeForum@yahoogroups.com, "Scott"
wrote:
> Joe I think forum member Stephen Birtles has those ballasts as
well.
> I have used thinlite for my porch lite and they were great. They
> rebuilt it and it did not work correctly and with no questions
asked
> they redid it again. Now it works great.
> Scott B
> 86FC35
> SC
> --- In WanderlodgeForum@yahoogroups.com, George Lowry
> wrote:
> > Joe,
> >
> > Check with Thinlite. They have a flat rate repair program that
> > includes a new warranty. Do a search for thinlite's web site.
> >
> > George Lowry
> > '95 WBDA 4203
> > Spearfish, SD Still at the Bird's Nest trying to get the dash
air
> working
> >
> >
> >
> > mjzakowski wrote:
> >
> > > Looking a a fluorescent ballast - 12 volt d.c. to fixes my
lights
> above
> > > the sink in a 1984 1/2 they need to be 1-9/16 W and 2-3/8 L.
> Received
> > > one from John Drake Service but its to big and I would have to
> try and
> > > modify the fixture to use it. Any suggestion?
> > > Joe from IN
> > > 1984 1/2 PT 40
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
stephen, do you have the ballassts for the electroilluminescent dash panels?
ernie- with no dash lites- need ralph's help on this
[Non-text portions of this message have been removed]
Ballasts measure 2inch long 17/8 inch wide and 1 inch high
Stephen 77fc35
--- In
WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
wrote:
> yes we have ballasts you can do the replacement in a number of
ways
> either place in the ballast in the fixture or remaove the ballast
> from the can it comes in and put in the fixture or lastly put
> ballast beside fixture in between the 2 layers of the upper
cupboard
> and run the wires into the fixture
> our ballasts are better built and more stable than thinlite
> Stephen 77fc35
> http://www.capeinnovation.com
>
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Scott"
> wrote:
> > Joe I think forum member Stephen Birtles has those ballasts as
> well.
> > I have used thinlite for my porch lite and they were great. They
> > rebuilt it and it did not work correctly and with no questions
> asked
> > they redid it again. Now it works great.
> > Scott B
> > 86FC35
> > SC
> > --- In WanderlodgeForum@yahoogroups.com, George Lowry
> > wrote:
> > > Joe,
> > >
> > > Check with Thinlite. They have a flat rate repair program that
> > > includes a new warranty. Do a search for thinlite's web site.
> > >
> > > George Lowry
> > > '95 WBDA 4203
> > > Spearfish, SD Still at the Bird's Nest trying to get the dash
> air
> > working
> > >
> > >
> > >
> > > mjzakowski wrote:
> > >
> > > > Looking a a fluorescent ballast - 12 volt d.c. to fixes my
> lights
> > above
> > > > the sink in a 1984 1/2 they need to be 1-9/16 W and 2-3/8
L.
> > Received
> > > > one from John Drake Service but its to big and I would have
to
> > try and
> > > > modify the fixture to use it. Any suggestion?
> > > > Joe from IN
> > > > 1984 1/2 PT 40
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
Yes I do have the invertoers for the dash panels
Stephen 77fc35
--- In
WanderlodgeForum@yahoogroups.com, erniecarpet@a... wrote:
> stephen, do you have the ballassts for the electroilluminescent
dash panels?
> ernie- with no dash lites- need ralph's help on this
>
>
> [Non-text portions of this message have been removed]