Hello WaGu,
When I retract the jacks , the motor runs and they attempt to Extend . I believe this a stuck solenoid , if so how do I determine which one , or am I wrong, and it is some other issue ? Thank you all in advance
There is a shuttle valve in the main manifold. It keeps the jacks from letting flow back thru the circuits to keep the coach level. I got caught sometime back with jacks the would not retract. I turned everything off, i tapped the main body between the frame rails. Restarted, everything worked fine. The shuttle valve was replaced that week. No problems since.
thank you Charlie, how do I identify the shuttle valve ?
Guys , any idea which one I need ?
VALVE - HYDRAULIC - MANUAL - MECHANICAL
"SHUTTLE VALVES"
PARTS MANUAL DIAGRAMS
SHUTTLE VALVE
RAP7964
ORDER
RELATED PART:
O-RING KIT R7430
ORDER
SHUTTLE VALVE - TALL
RAP6064
ORDER
RELATED PART:
O-RING KIT R7430
ORDER
SHUTTLE VALVE
RAP3623
ORDER
RELATED PART:
O-RING KIT R7430
ORDER
The shuttle valve is is under a bolt head maybe 3/4" or 1". It is located near center of the manifold body. I would not remove it under pressure.I do not know if it is tall or not.
thank you Charlie , I was able to look up the part on HWH web site and plan to order it once they help me determine which one it is .
here is the link to the shuttle valve I ordered today . HWH not only answered the phone, but had the part in stock for a delivery today .
http://www.hwh.com/mi158813.pdf
thank you for the info here , wagu is a great source for saving $$$$ and learning